KASTA H1CSB Hesperus Touch Remote Switch Instruction Manual
- October 27, 2023
- KASTA
Table of Contents
KASTA H1CSB Hesperus Touch Remote Switch
Important Safety Information
- This product must be installed by a licensed electrician in accordance with all the requirements of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
- Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.
- Indoor use only. Not suitable for damp or explosive environments.
- Complies to Australian Standards AS/NZS 60950.1:2015, AS/NZS CISPR 15.
- No user serviceable parts inside.
FEATURES
- Mains-powered capacitive touch remote switch mechanism.
- Simple 2 wire connection – A, N (LOOP available).
- Pairs to existing hard-wired KASTA devices including Switch Relays, Dimmers, Curtain controllers and many other devices.
- Configure smart functions via the KASTA app such as timers, scenes and groups as well as button indicator backlight.
- Fits most Australian Standard wall mounting accessories.
- Integral white backlight.
- To prevent a reduction in Bluetooth ® signal strength, install away from metal objects.
FUNCTION SETUP
-
ON/OFF 1 PRESS
Turns paired device on or off. When paired with a dimmable light, light will adjust to previous brightness level. -
DIM UP/DOWN ONE LONG PRESS
When paired with a light, long press button to dim up or down. Release button to stop. -
FULL BRIGHTNESS 2 PRESSES
When paired with a light, sets light to full brightness. -
**DELAY TO OFF 3 PRESSES***
Paired device turns off automatically after a set time (comfigured in the app). Single click to cancel. -
**VARIABLE 4 PRESSES***
Refer to the paired device for functionality. -
**VARIABLE 5 PRESSES***
Refer to the paired device for functionality. -
**BACKLIGHT 7 PRESSES***
Enable 10% backlight brightness. 7 presses to disable. -
FACTORY RESET 9 PRESSES
9 clicks of any button, restores all settings back to the factory. If successful, the white LED indicator will flash once.
APP ENABLED FUNCTION
- RETRIGGER TIMER 1 PRESS
Commence timer (on/off). Function must be programmed through the KASTA app first.
TECHNICAL SPECIFICATIONS
- Operating Temp: -20ºc to 40ºc
- Supply: 220-240V AC 50Hz
CONNECTION DIAGRAM
APP Installation
Visit www.kasta.com.au or your app store to
download the free KASTA app. iOS: requires iOS 9.0 or later. Android: requires
Android 4.4 or later. Devices must support Bluetooth 4.0