KASTA KB36RGBTWS5M Smart RGBTW LED Strip Light Kit 5m Instruction Manual

KASTA KB36RGBTWS5M Smart RGBTW LED Strip Light Kit 5m

Important Safety Information

This product must be installed by a licensed electrician in accordance with all the require ments of AS/NZS 3000 (current edition) and other relevant Standards and Regulations. Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.

• Indoor use only. Not suitable for damp or explosive environments.
• Complies to Australian Standards AS/NZS 60950.1:2015, AS/NZS CISPR 15.
• No user serviceable parts inside.

FEATURES

• RGB and Tuneable White LED strip kit including driver with flex and plug, KASTA in-line controller and 5m LED strip.
• Wireless Bluetooth Mesh communication.
• Can be paired with KASTA remote switch devices for operation (8x maximum per kit).
• On, off, dim and button press functions from local button (in-line controller) or KASTA remote switch devices.
• Configured and controlled using the KASTA app (iOS and Android).
• App offers a white CCT dial, a RGB colour wheel and a pre-set colour palette for intuitive control.
• Supports Group, Scene, Timer and Scheduling automation functions.
• 3 year warranty.

FUNCTION SETUP

Controllable via KASTA remote switch devices or the RESET button on the LED Strip in-line controller.

• ON/OFF
•  CLICK
• Turns strip on or off. When turned ON, strip will adjust to previous brightness setting.
• DIM UP/DOWN
• ONE LONG PRESS
• When strip is on, long press button to dim up or down.
• Release button to stop.
• FULL BRIGHTNESS
•  CLICKS
• Sets strip to full brightness.
• DELAY TO OFF
•  CLICKS*
• Strip turns off automatically after a set time (configured in the app).
• Single click to cancel.
• SET WHITE CCT COLOUR TEMPERATURE
• 4 CLICKS*
• Cycle through white CCT colour temperature. Click button 1 time to store setting.
• SET RGB COLOUR
•  CLICKS*
• Cycle though the pre-set colours to your desired colour.
• Click button 1 time to store setting.
• FACTORY RESET
•  CLICKS

Restores all settings back to factory. .

If successful, the strip will pulse the number of times that the button was clicked, indicating function.

TECHNICAL SPECIFICATIONS

Operating Temp: -20ºc to 40ºc|
---|---
Supply (Driver): 220 – 240V a.c.|
Operating Frequency (In-Line Controller): 2.4Ghz
Output (In-Line Controller): 2A/CH, MAX. 6A|

**CONNECTION DIAGRAM

**

Documents / Resources

| KASTA KB36RGBTWS5M Smart RGBTW LED Strip Light Kit 5m [pdf] Instruction Manual
KB36RGBTWS5M, Smart RGBTW LED Strip Light Kit 5m, Strip Light Kit 5m, Strip Light
---|---

References

• KASTA - Living Enhanced
• KASTA - Living Enhanced

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>