TORO 08146 2 Inch Receiver Draw Bar Instruction Manual
- June 9, 2024
- Toro
Table of Contents
TORO 08146 2 Inch Receiver Draw Bar
Installation
Preparing the Machine
- Park the machine on a level surface.
- Engage the parking brake or shift the transmission lever to the P (PARK) position.
- Shut off the machine and remove the key.
Installing the Hitch Ball Mount
- Insert the hitch ball mount into the receiver located at the back of the machine (Figure 1).
- Insert the hitch pin through the hole in the receiver and the hitch ball mount. Secure with the hairpin cotter (Figure 1).
- Hairpin cotter
- Receiver
- Hitch ball mount
- Hitch pin
Operation
Towing a Trailer
Refer to the Operator’s Manual for the machine for towing information.
© 2022—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>