LINDY 42693 50m USB 2.0 Cat.5 Extender User Manual
- June 4, 2024
- LINDY
Table of Contents
LINDY 42693 50m USB 2.0 Cat.5 Extender
Safety Instructions
WARNING !
Please read the following safety information carefully and always keep this
document with the product. Failure to follow these precautions can result in
serious injuries or death from electric shock, fire or damage to the
product.Touching the internal components or a damaged cable may cause electric
shock, which may result in death. This device is a switching type power supply
and can work with supply voltages in the range 100 – 240 VAC For worldwide
usability four different AC adapters are enclosed: Euro type, UK type,
US/Japan type and Australia/New Zealand type. Use the appropriate AC adapter
as shown in the picture and ensure it is firmly secured in place and does not
detach by pulling before installing into a power socket. To reduce risk of
fire, electric shocks or damage:
- Do not open the product nor its power supply. There are no user serviceable parts inside.
- Only qualified servicing personnel may carry out any repairs or maintenance.
- Never use damaged cables.
- Do not expose the product to water or places of moisture.
- Do not use this product outdoors it is intended for indoor use only.
- Do not place the product near direct heat sources. Always place it in a well-ventilated place.
- Do not place heavy items on the product or the cables.
- Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket
Instructions for Use of Power Supply
Attach the required adapter to the plug. Push the adapter firmly, twist until the latch secures the adapter. To remove, push the button and twist in the opposite direction.
Introduction
Thank you for purchasing the Lindy 50m USB 2.0 Cat.5 Extender. This product has been designed to provide trouble free, reliable operation. It benefits from both a Lindy 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for futurereference. The USB Cat.5 Extender is composed of a transmitting and receiving unit and enables any USB host device to send data up to 50 meters. In addition, by adding an additional USB Hub, several USB devices can be connected.
Package Contents
- Transmitter/Local Unit
- Receiver/Remote Unit
- Multi-Country Power Supply
- LINDY Manual
Features
- Supports USB 2.0 high-speed and USB 1.1 (full-speed, low-speed) devices
- Operates with USB 2.0 high speed host controllers and USB 1.1 classic hosts
- Further devices can be added by connecting an additional USB hub
- True plug and play without any driver installation
- Compatible with all USB Type A equipped computers
- Supports distances up to 50 meters using Cat.5/6 cables
- LED indicator
- Power supply for remote unit included
Specification
- Local Unit: 1 x USB 2.0 A male, 1 x RJ45 female
- Remote Unit: 1 x RJ45 female, 1 x USB 2.0 A female
- Power Supply 5V / 2A DC with 4 exchangeable power supply plugs for Europe, Great Britain, North America and Asia
- Dimensions: 30x60x15mm (1.18×2.36×0.59in)
- Operating Temperature: 0° – 70°C (32°F – 158°F)
Installation
Transmitter:
- Plug the USB A plug of the Transmitter into a USB A female port of your PC or laptop
- Connect a Cat.5/6 cable up to 50 meters long with the other end connected to the RJ45 port on the Receiver (see below)
Receiver:
- Connect your USB device such as keyboard, mouse, printer, hard disk drive, etc. with a standard USB cable to the USB A female port
- Power DC 5V Jack: Plug the supplied 5V 2A DC power supply into the unit and connect the adaptor to an AC wall outlet.
- Connect a Cat.5/6 cable up to 50 meters long with the other end connected to the RJ45 port on the Transmitter (see above)