LiGHTPRO 178S 12V Low Voltage Castor 4 3.5W IP44 Dimmable Spotlight User Manual
- June 9, 2024
- LiGHTPRO
Table of Contents
LiGHTPRO 178S 12V Low Voltage Castor 4 3.5W IP44 Dimmable Spotlight
Thank you for purchasing the Lightpro Castor 4. This document contains the
required information for correct, efficient and safe use of the product.
Consult the user manual of your transformer for more information about the
installation and connection of your lighting plan or visit our website
www.lightpro.nl
Read the information in this manual carefully before using the product. Keep
this manual near the product for consultation in the future.
PRODUCT DESCRIPTION
The Lightpro Castor 4 is an LED spot for outdoor use. The fixture can be mounted on a solid surface or placed in the ground with the supplied spikes. This product may only be used as outdoor lighting in combination with the Lightpro 12-volt system. Any alterations made to the product may have consequences for the safety, guarantee and correct functioning of the product and/or other parts of the system.
SPECIFICATIONS
- Product Lightpro Castor 4
- Article number 178S
- Light source LED 3,5W AC/DC 12V
- Power (max) 3,5W
- Luminous flux (max) 40 – 400 lm
- Light colour 3.000K
- Average lifetime 25.000
- Dimensions (H x B x W) 120 x 60 x 100 mm
- Protection class IP44
- Ambient temperature -20 °C to 50 °C
- Cable length 1m
- Dimmable Yes, with built-in dimmer
- Light source Not replaceable
- On/off 10.000
PACKAGING CONTENT
- Fixture Castor 4
- Ground spike
- Screw
- Plug
- Lightpro connector
- Hex key (large)
- Hex key (small)
Check if all parts are present in the packaging. For questions about parts, service, and any complaints or other remarks, you can always contact us. E-mail: info@lightpro.nl.
INSTALLATION
Option 1: placement on a fixed underground or mounting to a wall[Figure B]
- Remove the screw from the base using the included large hex key (Figure A [6]).
- Remove the fixture from the base.
- Install the base onto the underground with the included screw.
If necessary, drill a hole in the underground and use the included plug.
- Place the fixture in the base.
- Place the screw in the base.
- Put the fixture in the desired position.
- Fasten the screw using the included large hex key (Figure A [6]).
Option 2: placement in the ground [Figure E]
- Place the spike underneath the base.
- Properly fasten the spike.
- Put the fixture in the desired position.
- Fasten the screw using the included large hex key (Figure A [6]).
- Place the fixture in the ground.
DIMMER FUNCTION
The fixture is equipped with a built-in dimmer. The light output can be set to 6 different levels.
- Push the button to set the desired light output.
UK Authorised Representative (for authorities only) ProductIP (UK) Ltd. 8, Northumberland Av. London WC2N 5BY
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>