KAWA S5 2K QHD Video Wireless Baby Monitor User Manual

USER MANUAL
HD Video Wireless Baby Monitor
Model：S5

S5 2K QHD Video Wireless Baby Monitor

Dear KAWA Custowter,
Thank you For your trust in KAWA! In order to continuously iwtprove the quality of our products and services and provide you with better products and services, please send us an entail with the theme of “Product Experience Feedback”, leaving your valuable comments and suggestions and including your purchase order number.
You Will Get

1. An extension of the warranty by one year.
2. 10% off coupon for purchase of any new KAWA products.

Please contact: [email protected]

Box Contents

Monitor Features

1. Menu Button:
2. Short press the【Menu】to pop up the menu.
3. Short press the【 Menu 】to close the menu and return to the home page. 3) Hold the button: take a picture and save it to the memory card (please insert the memory card first).
4. Return to previous level of menu/Talk button：
5. Short press the【 return menu / Talk intercom 】button in the menu bar and return to the superior menu.
6. In any interface, long press【 return to the last menu / Talk intercom】 button to achieve voice intercom.
7. OK key / Zoom Key:
8. Click the 【OK 】button to enter the Camera Setting in the disconnected interface.
9. For function selection, press the 【OK 】key to confirm the selection.
10. When connecting multiple cameras and the monitor is in multi-screen display mode, press the “OK” button for 2 seconds to switch monitoring screen.
11. When the monitoring screen is displayed, briefly press this button to switch 1.5x, 2x, and 4x zoom and turn off zoom.
12. Up key / brightness + key
13. Down key / brightness – key
14. Left key / volume – key
15. Right key / volume + keyl
16. In the menu option state, press the up, down, left and right keys for menu selection.
17. When the monitoring screen is displayed, press the brightness + and brightness – keys to adjust the brightness of the display screen.
18. When the monitoring screen is displayed, press the volume + and volume – keys to adjust the volume of the display screen.
19. Power indicator of Monitor(Red: In Charge Green: Full Power）
20. Volume indicator of Camera:
21. Green: baby’s exposure to low-level environmental noise.
22. Yellow: baby’s exposure to moderate-level environmental noise, please check whether the baby is safe.
23. Red: baby’s exposure to high-level environmental noise, please check whether the baby is safe.
24. Power button: Long press for 3 seconds to power on / off, short press to switch on / off the monitor screen.
25. Reset Button
26. Microphone
27. Speaker
28. Display Screen
29. Support Stand / Back clip
30. Handle
31. Monitor TYPE-C Port

Camera Features

1. Wide-Angle Lens
2. Microphone
3. Camera Power LED Status Indicator
4. Camera Antenna
5. Speaker
6. Camera Pairing Button
7. Camera Micro USB Port
8. Micro SD Card Slot

Monitor Charging Method

Please fully charge the Monitor before using. Charging method：

1. Connect one end of the TYPE-C(1m) cable to the Baby Monitor, and the other end to the power adapter (5V 2A).
2. Plug the adapter into a power outlet.

Camera Power Supply Method

1. Connect one end of the Micro USB (2.6m) cable to the camera, and the other end to the power adapter (5 V 1A).
2. Plug the adapter into a power outlet.
   After powering the Camera and fully charging the Monitor, you can enjoy the video baby monitor.

Camera Installation Methods

1. Select a position with a wide viewing angle and place the camera directly.
2. Installation on the Wall (optional)
3. Tear off the positioning paper and stick it to the selected location.
4. For a wooden wall, drive a screw directly into the area covered by the paper ; for a concrete wall, drill a hole on the area and insert a bolt before tightening the screw into the wall.
5. Align the guide rail at the bottom of the camera with the screw and push the camera horizontally to lock it onto the wall.

Note: Please adjust the height and depth while tightening the screws to ensure that the camera is installed correctly.

Add Camera to the Baby Monitor
Baby Monitor and Baby Camera are paired out of the box. Please refer to the following steps when adding additional Baby Cameras or after resetting a Baby Camera：Please make sure the Baby Monitor and the Baby Camera matches the same version.

1. Press the【MENU】button to open the menu , select “Camera Setting” → ” Camera Pairing”, press 【OK】to add Camera.
2. Press the pair button on the back of the Camera for seconds until you hear the ticking prompt.

Note: If you restore the initial plant settings, press the OK button in the “Please add a camera” interface to add Camera.

WARNING!
After the Monitor and Camera are successfully connected, please avoid using the Monitor and Camera close to each other, otherwise it may cause howling .
Display Mode of Screen
When you add more than two Baby Cameras, you can manually and automatically switch camera screen.

1. Manual switching: Long press the 【OK 】button, the screen will be switched to the next screen. The icon of the camera you select will display.
2. Automatic switching (Muti-Camera Cycling): select “Camera Setting”-> “Display Mode”-> “Muti-Camera Cycling/ ”option. The screen cycles through the list of connected Baby Cameras according to pre-set intervals.

Full Screen
This mode allows you to see one camera in full-screen view.

Monitor Menu Settings & Icons Description

1. Menu settings
Press the 【MENU】 button on the Monitor to display the functional interface, as shown below:

Monitor Mode
VOX Mode:- When you turn on the VOX mode, the screen will be turned on automatically if the noise is detected above your pre-set level. Select “Audio Only”, monitor display turns off, but you’ll hear
VOX Threshold:- 1-5 thresholds are optional.
Audio Only:- Select “Audio Only”, monitor display turns off, but you’ll hear audio from your camera(s).
Alert
Sound Alert:- You can set the Baby Monitor to alert you when a specific noise level is detected.
Note: Surrounding noise might set off false alarm.
Alarm Duration:- 5 Secs, 10 Secs, 20 Secs and 30 Secs are optional.”10 Secs” by default. The monitor will alert continuously according to the alert duration you set.
Alarm Volume:- 1-3 volume are optional, “2” by default.
Note: When the Monitor paired more Cameras, if you set volume 1 which means all paired cameras are volume 1.
Key Note: The interval duration between each sound alarm is 5 seconds.
It will not alert during this interval even there is alert trigger condition.
Lullaby
Monitor white noise:- For adults to have a good sleep. Select the white noise you want, and press the volume + and volume – keys to adjust the volume while the monitoring screen is displayed.
Camera Lullaby:- Comfort baby. Select your desired lullaby song. You can adjust the volume by pressing the “-/+” volume button.
Note: Alert is automatically disabled after enabling the lullaby function.
Warning: The sound of lullabies may mask the baby’s cry.
Clock Reminder
Feeding、Diaper Changing、Other
Off、1H, 1.5H, 2H, 2.5H, 3H, 3.5H, 4H and custom are optional.
Description:

1. Off indicates that the timing reminder function is off.
2. 1H, 1.5H, 2H, 2.5H, 3H, 3.5H, 4H indicates a reminder timing function after 1, 1.5, 2, 2.5, 3, 3.5, 4 hours.(e.g.When you choose “Feeding” -> “3H”, means that the alarm clock will remind you to feed after 3 hours )
3. Custom: You can set the clock according to the time you need.

Camera Settings
Camera Pairing

1. Add Camera(Note: You can add up to 4 cameras per baby monitor.)
2. Delete Camera

Display Mode:- Full screen, cycle cameras.
Note: When multiple cameras are connected and set to “cycle cameras”, the monitor will cycle through the list of connected baby monitors according to the pre-set interval.
Video Screen Setting:- “Normal” by default.When the camera is inverted for mounting, select the corresponding camera first, select “Rotate 180°”, and then press “OK” to complete the setting.
Record Mode:- No Record，Cyclic Recording(when motion detected)， Cyclic Recording.
Select ‘No Record’：it means that the video will not be recorded, and it won’t be stored in the micro SD card.
Select ‘Cyclic Recording(when motion detected)’: It means that recording starts when motion detected. “Cycle” means that when the micro SD card fills up, the earliest videos will be gradually and automatically deleted to store the latest video.
Select ‘Cyclic Recording’ : it means that the video will keep recording circularly, no matter the motion detected or not.
Please use a 16GB~128GB Micro SD card with data rate of Class 10 or above.
Time Stamp:- If the Time Stamp is enabled, the recorded video will contain the time information. In some cases, it can be used as video evidence.
Status of micro SD card:- Show more details of the micro SD card.
You can select ‘format’ to format the micro SD card. Cautious! Formatting will delete all files in the micro SD card and cannot be recovered.
More Settings
Night Vision Mode:- Automatic and close are optional.
When set to “Auto”, camera automatically switches the screen color according to the light condition in the room.
Note: If the night vision mode is set to “Close”, the Monitor will stick to daylight screen color and will not change when the surrounding environment is getting dark.
Time Setting:-  Set the monitor system time.
Sleep Mode:- Off, 1min, 3mins and 5mins optional.
Enable to automatically turn off the screen after 1min, 3mins or 5mins. If you select “Off”, the screen won’t sleep automatically.
Language Setting:- Set the monitor display language.
Anti-Screen Flicker:- If the baby monitor’s screen is flickering, change to the other Anti-Screen Flicker mode.
Illumination source frequency: 50Hz and 60Hz optional. Please select the approiate frequency of the lighting source.
Default Settings:- Resets all options to their default setting.
Version Information:- Display Monitor version number, Camera version number, Monitor SN number, Camera SN number.

2. Small icons description

| Wireless signal strength
---|---
| Current battery power status of monitor
| Baby Monitor is charging
| Baby Monitor has successfully connected to Camera
| It is cycling through the Cameras screens, and currently cycling to Camera3
| Night Vision Mode is enabled
| Camera is cycling lullabies
| Camera is playing a single lullaby
| Currently set time
| Acoustic alarm is triggered
| VOX mode is on

Warning Explain
Warning
STRANGULATION HAZARD: Cords can strangle children. Keep cords out of the reach of children (more than 3ft (0.9m) away).

Certification
This device complies with the radio interference requirements of the European Community.
Hereby, KAWA ELECTRONICS COMPANY LIMITED declares that the radio equipment type Baby Monitors $5 is in compliance with Directive 2014/ 53/EU.The full text of the EU declaration of conformity is available at the following internet address: www.kawa-in.com
The product shall only be connected to a USB interface of version USB2.0 or higher and that the connection to a power USB is prohibited.
Caution:
For Adapter: Shall be installed near the equipment and shall be easily accessible.
For Battery: Risk of explosion battery is replaced by an incorrect type, dispose of used batteries according to the instructions. To prevent possible hearing damage, do not listen at high volume levels for long periods.
Only can use the adapter as below:
S5-M: Rated Input & Output: AC100V-240V, 50/60Hz, 200mA, DC5.0V, 2A.
S5-C: Rated Input & Output: AC100V-240V, 50/60Hz, 200mA, DC5.OV, 1A.
Manufacturer: KAWA ELECTRONICS COMPANY LIMITED
Model Name: Baby Monitor SS
The plug could be disconnected from adapter.

| EVATOST CONSULTING LTD
Suite 11, First Floor, Moy Road Business
Centre, Taffs Well, Cardiff, Wales, CFLS 7QR
[email protected]
---|---
| eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main, Germany
[email protected]

FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.
This device contains licence-exernpt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development \Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency Exposure Statement for IC:
This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

Declaration Of Conformity

1. Please use the standard AC Power Chargers and Charging Cables.
2. Do not use the device in an environment where the temperature is too high or too low, and do not expose the device to strong sunlight or an environment that is too humid.
3. The suitable ambient temperature for S5-M and accessories is -10°C to +50°C.
4. The suitable ambient temperature for S5-C and accessories is -10°C to +50°C.
5. When charging, please place the device in a well-ventilated environment with normal room temperature. It is recommended to charge the device within the temperature range of 0°C~45°C.

** This product is designed and manufactured with high quality materials and components, which can be recycled and reused,
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment.
For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
Warranty: 12-month limited warranty
Manufacturer: KAWA ELECTRONICS COMPANY LIMITED
Email:[email protected]
Web:www.kawa-in.com
Address:** FLAT A 21/F CHEUNG LEE IND BLDG 9 CHEUNG LEE ST CHAI WAN HONG KONG

KAWA ELECTRONICS COMPANY LIMITED All rights reserved.
KAWA LOGO are KAWA ELECTRONICS COMPANY LIMITED trademarks in the United States, Japan, Europe, the United Kingdom, China and other countries/regions. Alt other trademarks are the property of their respective owners.
Note: Illustrations of the product , accessories , and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.
ABOUT US
KAWA focuses on the design, R&D and manufacturing of intelligent security products. We have the R&D team of more than 200 people, and nearly 2000 manufacturing personnel in the automatic production base of 30000 square meters. Based on machine vision as the core and deep-learning algorithms as the soul to build smart hardware products, through continuous innovation, leading products with scientific and technological charm will be brought to global consumers, let people enjoy the comfortable and pleasant life in the safe and convenient environment which created by intelligent technology. KAWA Mission: From home to car, exceeding customer expectations
KAWA Vision: Better Life, Safer and Smarter.

References

• KAWA Official Website

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>