Xhorse XKDS Universal Remote Key User Manual

June 1, 2024
Xhorse

Xhorse XKDS Universal Remote Key

Xhorse-XKDS-Universal-Remote-Key-product

Product Information

Specifications:

  • Model: XKDS Universal Remote Key
  • Battery Type: CR2032 3V
  • Frequency Band: RFID 433.92 MHz
  • Compliance: CE, UKCA, FCC

Product Usage Instructions

Button Description:

  • 1: Switch button for mechanical key
  • 2: Lock button of car
  • 3: Unlock the button of car trunk
  • 4: Unlock the button of car

Changing Battery:

  1. Just pry the plastic cover upward to access the battery compartment.
  2. Remove the old battery and replace it with a new CR2032 3V battery.
  3. Note: Ensure the correct orientation of the battery (positive and negative).

Pairing Method:

To pair with a vehicle, refer to the corresponding vehicle models for matching. Install the key as before to complete the pairing process.

Frequently Asked Questions (FAQ)

  • Q: What type of battery does the XKDS Universal Remote Key use?
    A: The remote key uses a CR2032 3V battery.

  • Q: How do I change the battery in the remote key?
    A: Simply pry the plastic cover upward to access the battery compartment, and replace the old battery with a new one, ensuring correct orientation.

  • Q: How do I pair the remote key with my vehicle?
    A: Refer to the corresponding vehicle models for pairing instructions. Install the key as usual to complete the pairing process.

Overview

XKDS Universal Remote Key is suitable for vehicle which contains the Xhorse receiver.
Note : The operating temperature of the product is -20–50℃.

Button description

Xhorse-XKDS-Universal-Remote-Key-fig-
\(1\)

Change battery

First use or when the battery runs out need to change new battery, following the stepsXhorse-XKDS-Universal-Remote-Key-fig- \(2\)

  • Just pry the plastic cover upward

  • Take the battery out and replace a new one
    Note : The battery type is 2032 with 3V, ensure the positive and negative of the battery is correct

  • Install the key the same as before

Pairing method

Pairing with vehicle: Referring to the corresponding vehicle models to match

FCC statements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

*RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction

CE & UKCA statements

Frequency Band(s)
This device operates with the following frequency bands and maximum frequency power.
Note : The product is compliant with these power limits required by the European Union. Frequency bands supported by the product vary by model.
RFID (433.92 MHz) Max Pe.r.p. is -31.5 dBm.

EU & UKCA DECLARATION OF CONFORMITY

Hereby, Shenzhen Xhorse Electronics Co., Ltd. declare that the Universal Remote Key with model XKDS complies with Directive 2014/53/EU, 2011/65/EU and RER 2017 (SI2017/1206).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals