sOmfy Ysia 1 Zigbee Gateway Installation Guide

: June 9, 2024
: somfy

Table of Contents

Ysia 1 Zigbee Gateway
In detail (Figure [A])
Start-up
Selection of groups (Figure [B])
Installation
Replacing the batteries (Figure} [D])
Technical data
Documents / Resources

Ysia 1 Zigbee Gateway Installation Guide

Ysia 1 Zigbee Gateway

|
---|---
ysia1zigbee| ysia5zigbee

Complete instruction guide (advanced settings, tips and advice) available online on https://www.somfy.info/fr/p/Ysia
Please read this guide carefully before installing or using this product. Please also comply with the instructions set out in the enclosed Safety instructions document.

In detail (Figure [A])

a) Transmission indicator LED
b) Up button (Short activation enables the application to be raised, switched on or opened. Long activation enables some additional functionality. See complete instructions for more details).
c) Stop/my button (enables the application to stop by pressing the button once or switched to the favorite position by pressing the button twice).
d) Down button (Short activation enables the application to be lowered, switched off or closed. Long activation enables some additional functionality. See complete instructions for more details).
e) Channel or group select LEDs (Ysia 5 Zigbee only)
f) Channel or group selector (Ysia 5 Zigbee only)
g) Battery cover
h) PROG button
i) Wall mount

Start-up

Download the TaHoma application if it is not yet installed on the smartphone.
NOTICE
Somfy motor can be set and used with this product without TaHoma Box (HUB Optional only).

Selection of groups (Figure [B])

Before using Ysia 5 Zigbee, check that the correct group has been selected.

Installation

4.1. Adding/Deleting Ysia Zigbee
Follow the instructions on the TaHoma application to add or remove a Ysia Zigbee.
4.2. Wall mounting (Figure} [C])
Open the wall mount (i) and fix it to a flat surface using a screwdriver and an M3-type screw.
CAUTION
Do not use an electric screwdriver.

Replacing the batteries (Figure} [D])

DANGER
Read the Safety instructions document.
Explosion risk if the battery is replaced by an incorrect type.
Insert the batteries types 2 x AAA LR03, 2 x 1.5 V, as indicated by the polarity (+ and – signs) markings in the battery compartment. The power supply terminals must not be short-circuited.

Technical data

Frequency range used: 2.405GHz MHz – 2.480 GHz.
US and Canada maximum e.r.p.< 100 mW.
Other countries maximum e.r.p.< 10 mW.
The environment in which the product is used might reduce the radio range.
The use in the same room as the controlled products is recommended.
Radio range: 50 m in Free field (optimal condition).
Operating temperature: 0°C (+32°F) to +48°C (+118.4°F).
Power supply: Battery type 2 x AAA LR03, 2 x 1.5 V.

**** SOMFY ACTIVITES SA, 74300 CLUSES FRANCE hereby declares that the radio equipment covered by these instructions is in compliance with the requirements of Radio Directive 2014/53/ EU and the other essential requirements of the applicable European Directives. The full text of the EU Declaration of Conformity is available at www.somfy.com/ce.

Somfy limited, Yeadon LS19 7ZA UK, hereby declares that the radio equipment covered by these instructions is in compliance with the requirements of UK legislation: the Radio Equipment Regulations S.I. 2017 N°1206. The full text of the UKCA declaration of conformity is available at www. somfy.co.uk.

FCC warning statement:
-This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
– This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the speciﬁc operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
– Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions:

This device may not cause interference; and
This device must accept any interference, including interference that may cause undesired operation of the device.

[FCC: DWN-YSIA1, DWN-YSIA5] [ISED: 12049A-YSIA1, 12049A-YSIA5]

SOMFY ACTIVITÉS SA
50 avenue du Nouveau Monde
FRANCE – 74300 Cluses
www.somfy.com
100% recycled paper

Documents / Resources

| sOmfy Ysia 1 Zigbee Gateway [pdf] Installation Guide
YSIA5, DWN-YSIA5, DWNYSIA5, Ysia 1 Zigbee, Ysia 5 Zigbee, Ysia 1 Zigbee Gateway, Gateway
---|---
| somfy Ysia 1 Zigbee Gateway [pdf] User Guide
Ysia 1 Zigbee Gateway, Ysia 1, Zigbee Gateway, Gateway