neno Nube Electronic Multifunctional Bouncer User Manual

Nube Electronic Multifunctional Bouncer
User Manual

Nube Electronic Multifunctional Bouncer

Dear Customer,
Thank you for purchasing the Neno Nube baby rocking chair and recliner. This product is suitable for children up to 9 kg and those who are unable to sit up independently. Please read the user manual before use and keep it in case you need to use it again.

**** WARNINGS:

1. Never leave a child unattended.
2. Do not use the product if the child can sit up unaided or weighs more than 9kg.
3. The product is not intended for prolonged sleep.
4. Never use this product on elevated surfaces such as a table.
5. Always remember to use a safety system.
6. To avoid injury, make sure children are at a safe distance when folding and unfolding the product.
7. Do not let children play with the product.
8. Do not move or lift the product if the child is in it.
9. This product is not a replacement for a cot or bed. If your child needs to sleep, move your child to a cot or bed.
10. Do not use the product if any component is damaged or missing.
11. Do not use accessories or spare parts other than those approved by the manufacturer.
12. Check that the straps fit properly every time, and also that they are securely fastened when you lay your child down.
13. The power supply terminals must not be short-circuited.
14. Do not use adapters other than those supplied with this product to power the product.
15. Keep children away from the working charger.
16. Regularly check the connection of the cable to the adapter.
17. Regularly check the attachment of the seat cover to the seat frame.
18. Always check all fixings before use and ensure that the components have been correctly fitted.
19. Before activating the rocking function, make sure nothing is standing nearby that could cause a blockage or collision with the product.
20. Also make sure that your child does not have access to objects, walls or other things that they can reach for or push away from. This can cause injury, suffocation and choking.
21. Do not extend or change the charging cable.
22. Do not extend the attached toys in any way, and do not hang toys other than those included.
23. Do not leave the product in full sunlight or close to heat sources.
24. Check regularly the condition of seams, material joints, structures and screws. If wear is detected, discontinue use immediately and replace the item with a new one.

RISK OF FALLING AND SUFFOCATION:
The infants suffered neck and head injuries falling from the rocker and suffocating in the straps.
ALWAYS use seat belts. Fit them so that they fit tightly.
STOP using the product when the infant tries to get out of the product (around 6 months).
Stay nearby and watch the infant while using the product. This product is not safe for unsupervised use or unattended sleeping.

CONTENTS OF THE KIT

1. Rocker base
2. Seat frame
3. Seat cover
4. Charger
5. Canopy with mosquito net
6. Pillow
7. 2 toys
8. Pilot

UNFOLDING OF THE SEAT FRAME

1. Press the left and right buttons, meanwhile lifting the top tube. SEE FIG. A. 1.
2. Press the left and right buttons, meanwhile lifting the lower tube. SEE FIG. A. 2.

PRODUCT INSTALLATION

1. Place both parts of the base on a flat surface. Align the joints on both sides as shown in the picture. And also align the power cables. SEE FIG. B. 1
2. Connect the power cables together. SEE FIG. B. 2.
3. Reconnect the other side of the base. SEE FIG. B. 3.
4. Fit and join the two sides of the base, then carefully turn the bottom upwards. SEE FIG. B. 4.
5. Place and carefully tighten the screws in position as shown in the picture. SEE FIG. B. 5.
6. Remove the 2 plastic locking clamps from the base. SEE FIG. B. 6.
7. Place the seat frame into the base aligning the rectangular piece. SEE FIG. B. 7.

FITTING/REMOVING THE SEAT COVER AND CUSHION

1. To remove the cover, unfasten the 3 snaps on the bottom of the rocker and then slide it off the frame.
2. To fit the cover, place it over the frame, taking into account where the top is. And then carefully fasten the 3 snaps. Make sure they are fastened securely.
3. To remove the cushion, unfasten the Velcro and pull the retaining strap through the handle attached to the seat cover.
4. To put the cushion on, put the attachment strap through the handle and then fasten the Velcro on the strap.
5. If you wish to remove or fit the seat padding follow steps 3 and 4.

SEAT ADJUSTMENT

SEE FIG. C

1. Press and hold the button numbered 1 in the picture at the same time on the left and right side to adjust the angle of the backrest. There are 3 possible levels. SEE FIG. C. 1.
2. Press and hold the button numbered 2 in the image at the same time on the left and right to adjust the horizontal position. There are 2 possible positions. SEE FIG. C. 2.

CANOPY WITH TOYS

1. Attach the toys to the canopy by putting the attachment strap from the toy through the attachment bracket, which is located near the connection between the fabric and the mesh. Once you have put the strap through, fasten the Velcro. Proceed in this way for both toys.
2. Attach the side mount to the rocker at the location as shown in the picture, then push the mount into the rocker so that the tube from the rocker fits into the space in the canopy mount. Then fasten the 2 Velcro fasteners on the underside near the cushion. SEE FIG. D.

SEAT BELTS

1. Place the child in the rocker and position so that the wide centre strap is between the child’s legs. SEE FIG. E. 1.
2. Then place the top straps over the child’s shoulders and put the left side through the hole on the left and the right side through the hole on the right, respectively, through the holes in the middle strap. SEE FIG. E. 2.
3. Clip the side straps into the holes in the top straps. SEE FIG. E. 3.
4. Clip the connected straps on both sides into the middle strap. SEE FIG. E. 4.
5. Make sure the straps fit your child properly and that all attachments are securely clipped in.
6. Fasten with Velcro to secure the straps. This is essential to prevent your child from accessing the fastener. SEE FIG. E. 5.
7. To unbuckle the straps press the button on the safety catch once the safety catch is unfastened. Pull the top straps out of the holes. SEE FIG. E. 6.

PILOT

SEE FIG. F

1. On/off
2. Music – a group of buttons designed to control music
3. Time switch- 8/15/30 minutes
4. Built-in song mode/ USB/ Bluetooth
5. Volume „+”
6. Volume „-”
7. Pause/play
8. Previous song
9. Next song
10. Level 2 rocking sleep mode with a 15-minute on/off timer
11. Rocking levels
12. Stop rocking function

BATTERY INSTALLATION

1. Turn the battery cover screw located behind the display and remove the cover.
2. Insert 4 AAA batteries.
3. Replace the battery cover and tighten the screw carefully.

LOCKING AND UNLOCKING OF ROCKING

SEE FIG. G

1. Press the down button to block rocking.
2. Lift the button up to unlock.
3. Ensure each time before activating the rocking function that it has been unlocked. Turning on the rocking while in the locked position may damage the product.

PANEL DESCRIPTION AND OPERATION

SEE FIG. H

1. Power supply – Switch the product on/off

2. Music
   • Press to start playing embedded songs. Press again to stop playing songs.
   • Connect via BT on your smartphone to the product named „BT_BABY”. The rocker will make a sound to inform you that the connection is correct.
   • Plug your USB music media into the USB port on the rocker and play your stored songs. Next song- Press the button to start playing the next song

3. Next song – Press the button to start playing the next song

4. Rocking level indicator

5. Time indicator

6. Rocking levels- Press the button to set 1 of the 5 rocking levels. The current level is displayed by the level indicator.

7. Timed switch- Press the button to activate the switch-off function after 8, 15 or 30 minutes of rocking function.

8. Turning down the volume of tracks being played

9. Increasing the volume of tracks being played

CLEANING

1. Clean the base and seat frame with a damp cloth. Do not use detergents for cleaning. Then stand until dry so that no watermarks are visible.
2. Clean the seat cover, seat padding, cushion and canopy with a damp cloth without detergent. No parts may be washed in the washing machine or tumble-dried. Do not dry clean. Leave to dry in the open air.
3. Failure to do so may result in discolouration, distortion and damage to the components.

TRANSPORT

Remember to transport the rocker only with the base locked, SEE POINT 11. Never grab the seat parts. Always transport by holding the base of the rocker. Transporting the base unlocked can cause damage to the mechanism.

SPECIFICATIONS:

Input: 220-240V 50/60 Hz
Charger output: 5V/1A
Cable length: approx. 2m
Material: fabric (100% polyester)
Maximum radio frequency power emitted in the frequency range: – 3.59 dBm
Frequency range: 2.402-2.480 GHz

WARRANTY CARD

The product comes with a 24-month warranty. Warranty terms and conditions can be found at: https://neno.pl/gwarancja
Details, contact and service address can be found at: https://neno.pl/kontakt
Specifications and contents are subject to change without notice. We apologise for any inconvenience.
KGK Trade declares that the Neno Nube complies with the essential requirements of the RED Directive 2014/53/EU.
The text of the declaration can be found at the following link: https://neno.pl/download/DOC/deklaracja-CE-Neno-Nube.pdf

The crossed out trash can symbol indicates that unusable electrical or electronic devices, its accessories (such as power supplies, cords) or components (for example batteries, if included) cannot be disposed of alongside with household waste. In order to dispose of the devices or its components (for example, batteries) deliver the device to the collection point, where it will be accepted free of charge. Disposal is subject to the recast version of the WEEE Directive E2012/19/EU) and the Directive on batteries and accumulators (2006/66/C). Proper disposal of the device prevents degradation of the natural environment. Information about the collection points of the facilities is issued by the competent local authorities. Incorrect disposal of waste is subject to penalties provided for by the law in force in the given area.

Manufacturer:
KGK Trade sp. z o.o. sp. k.
Ujastek 5b
31-752 Cracow
Poland
Made in PRC

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>