AAMP P-BUA-RANGER Wiring Harness for Backup Alarm 2019-2022 Ford Ranger Instruction Manual
- June 9, 2024
- AAMP
Table of Contents
AAMP P-BUA-RANGER Wiring Harness for Backup Alarm 2019-2022 Ford Ranger
Instruction Manual
Thank you for purchasing the
P-BUA-RANGER
Page 3 – Tools Required For Installation
WHAT’S INCLUDED
- Vehicle Specific Wire Harness (P-BUA-RANGER)
COMPATIBLE ACCESSORIES
- 97dB Backup Alarm (BUA-97C)
TOOLS REQUIRED
-
10mm Nut-setter
-
Impact Drill
-
Diagonal Cutters
Instruction
STEP 1:
Locate the OEM tail lamp connector that is on the outside of the driver side
frame rail 4 5
STEP 2:
Unplug the OEM connector and install the P-BUA-RANGER harness between the OEM
connectors
STEP 3:
Route the harness over the top side of the frame rail, toward the center of
the truck
STEP 4:
Use an impact drill and 10mm nut-setter to install a compatible backup alarm
on the underside of the vehicle
Note: (2) 10mm TEK screws are provided with the compatible backup alarm
STEP 5:
Plug the backup alarm connector into the mating connector on the P-BUA-RANGER
harness. Secure any excess wiring with cable ties. Use diagonal cutters to
remove excess cable tie material.
STEP 6:
Test the backup alarm
Support
Phone-866-931-8021(option 3)
[email protected]
aampcommercial.com