AAMP P-BUA-SILVERADO Wiring Harness for Backup Alarm 2016 to 2022 Chevrolet Silverado Instruction Manual
- June 9, 2024
- AAMP
Table of Contents
AAMP P-BUA-SILVERADO Wiring Harness for Backup Alarm 2016 to 2022 Chevrolet
Silverado
Thank you for purchasing the
P-BUA-SILVERADO
WHAT’S INCLUDED
- Vehicle Specific Wire Harness (P-BUA-SILVERADO)
COMPATIBLE ACCESSORIES
- 97dB Backup Alarm (BUA-97C)
TOOLS REQUIRED
- 10mm Nut-setter
- Impact Drill
Instructions for Use
-
STEP 1: Locate the OEM tail lamp connector that is below the truck
– The connector is to the left of the vehicle’s spare tire on the cross member -
STEP 2: Unplug the OEM connector
-
STEP 3: Install the P-BUA-SILVERADO harness between the two OEM connectors
-
STEP 4: Use an impact drill and 10mm nut-setter to install a compatible backup alarm on the metal surface that is below the truck’s tail lamp cavity (just outside and above the driver side frame rail).
Note: (2) 10mm TEK screws are provided with the compatible backup alarm -
STEP 5: Plug the backup alarm connector into the mating connector on the P-BUA-SILVERADO harness
-
STEP 6: Enter the Vehicle Settings menu through the driver’s information center
- Change the remote entry exterior lighting to “off”
- This will prevent the backup alarm from sounding when the vehicle is unlocked with the OEM keyless entry transmitter
-
STEP 7: Test the backup alarm
Customer Service
Phone – 866-931-8021 (option 3)
E-Mail – [email protected]
AAMP Commercial is a Power Brand of AAMP Global
aampcommercial.com
