AAMP P-BUA-EXPRESS Wiring Harness for Backup Alarm 2014 to 2022 Chevrolet Express Instruction Manual
- June 9, 2024
- AAMP
Table of Contents
AAMP P-BUA-EXPRESS Wiring Harness for Backup Alarm 2014 to 2022 Chevrolet
Express
WHAT’S INCLUDED
- Vehicle Specific Wire Harness (P-BUA-EXPRESS)
COMPATIBLE ACCESSORIES
- 97dB Backup Alarm (BUA-97C)
TOOLS REQUIRED
- 10mm Nut-setter
- Impact Drill
- Panel Removal Tool
- Pry Bar
- Fish Tape
Installations
-
STEP 1:
Remove the body grommet that is located beneath the driver-side rear corner of the vehicle with a panel removal tool -
STEP 2:
Use a pry bar to push aside the composite material (A.) that is blocking the cavity (B.) behind the grommet
-
STEP 3:
Locate the OEM tail lamp connector in the rear corner on the driver’s side of the vehicle. Unplug the OEM connector and install the P-BUA-EXPRESS harness between the OEM connectors. -
STEP 4:
Use fish tape to route the 2-pin connector of the harness down the C-Pillar and through the grommet cavity opening -
STEP 5:
Use an impact drill and 10mm nut-setter to install a compatible backup alarm on the underside of the vehicle
Note: (2) 10mm TEK screws are provided with the compatible backup alarm -
STEP 6:
Plug the backup alarm connector into the mating connector on the P-BUA-EXPRESS harness and re-install the grommet. -
STEP 7:
Test the backup alarm.
Contact Information
Phone – 866-931-8021 (option 3)
E-Mail – support@aampglobal.com.
AAMP Commercial is a Power Brand of AAMP Global
aampcommercial.com.