AAMP P-BUA-F150 Wiring Harness for Backup Alarm 2018-2020 Ford F-150 Instruction Manual
- October 30, 2023
- AAMP
Table of Contents
AAMP P-BUA-F150 Wiring Harness for Backup Alarm 2018-2020 Ford F-150
Instruction Manual
Thank you for purchasing the
P-BUA-F150
WHAT’S INCLUDED
- Vehicle Specific Wire Harness (P-BUA-F150)
COMPATIBLE ACCESSORIES
- 97dB Backup Alarm (BUA-97C)
TOOLS REQUIRED
-
10mm Nut-setter
-
8mm Nut-setter
-
Impact Drill
-
Diagonal Cutters
Instruction
STEP 1:
Use an impact drill and 8mm nut-setter to remove the driver side tail lamp
STEP 2:
Unplug the OEM connector and install the P-BUA-F150 harness between the OEM
connectors
STEP 3:
Route the harness down the tail lamp cavity and re-install the driver side
tail lamp
STEP 4:
Use an impact drill and 10mm nut-setter to install a compatible backup alarm
on the underside of the
vehicle
Note: (2) 10mm TEK screws are provided with the compatible backup alarm
STEP 5:
Plug the backup alarm connector into the mating connector on the P-BUA-F150
harness. Secure any excess wiring with cable ties. Use diagonal cutters to
remove excess cable tie material.
STEP 6: Test the backup alarm
