AAMP Commercial P-BUA-F150-21 Wiring Harness for Backup Alarm Instruction Manual
- June 9, 2024
- AAMP Commercial
Table of Contents
P-BUA-F150-21
Wiring Harness for Backup Alarm
2021-2022 Ford F-150
INSTALLATION MANUAL
P-BUA-F150-21 Wiring Harness for Backup Alarm
Thank you for purchasing the
P-BUA-F150-21
WHAT’S INCLUDED:
- Vehicle Specific Wire Harness (P-BUA-F150-21)
COMPATIBLE ACCESSORIES:
- 97dB Backup Alarm (BUA-97C)
TOOLS REQUIRED:
- 10mm Nut-setter
- 8mm Nut-setter
- Impact Drill
- Diagonal Cutters
STEP 1:
Use an impact drill and 8mm nut-setter to remove the driver side tail lamp
STEP 2:
Unplug the OEM connector and install the P-BUA-F150-21 harness between the OEM
connectors
STEP 3:
Route the harness down the tail lamp cavity and re-install the driver side
tail lamp
STEP 4:
Use an impact drill and 10mm nut-setter to install a compatible backup alarm
on the underside of the vehicle
Note: (2) 10mm TEK screws are provided with the compatible backup alarm
STEP 5:
Plug the backup alarm connector into the mating connector on the P-BUA-F150-21
harness.
Secure any excess wiring with cable ties. Use diagonal cutters to remove
excess cable tie material.
STEP 6:
Test the backup alarm
Phone – 866-931-8021 (option 3)
E-Mail – support@aampglobal.com
AAMP Commercial is a Power Brand of AAMP Global
aampcommercial.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>