Astronautics AFS6360 Connectivity Module User Manual
- June 5, 2024
- Astronautics
Table of Contents
Astronautics AFS6360 Connectivity Module User Manual
Product Constraints
WARRANTY CAUTIONS:
Professional installation of the AFS6460 is required.
Please see the Installation Control Document ICD13150K or later to properly install the unit in an air vehicle.
Electrostatic Precautions:
The Connectivity module does contain interior components that are susceptible
to damage due to electrostatic discharge when handling directly. The operator
is not to open the connectivity module and handle the interior components.
ACA PN: 199324-1
CONFIGURATION NOTICE:
The connectivity module has no operator adjustable settings for power or frequency channels. All power and frequency settings are set by Astronautics and a tamper resistant VOID IF REMOVED LABEL (PN: 280755) is placed on the connectivity module before the Certificate of Conformity is issued. The operator is not allowed to modify radio module input power levels, add frequency ranges, or the certification license(s) labeled on the modified connectivity module will be void.
NOTICE:
Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void the FCC authorization to operate this equipment.
SOFTWARE INSTALLATION
The connectivity module must be configured with Astronautics software. Please refer to the Airvehicle Maintenance Manual (AMM) and / or any corresponding Service Bulletins (SB) for the certified and approved configurations of software.
The connectivity module contains the following labeling for software
configuration notice to the installer.
ACA PN: 263620-1
RADIO EMITTER NOTICE
Exposure to Radio Frequency Radiation
This connectivity module and its antennas must not be co-located or operating in conjunction with any other antenna or transmitter other than the certified and approved equipment provided by air vehicle manufacturer. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The connectivity module is to be installed and operated with a minimum distance of 20 centimeters between the radiator (antenna) and your body.
RADIO ANTENNA NOTICE
Aircraft Minimum Separation during Installation
The connectivity modules antennas are required to be installed and operated with a minimum distance of 20cm between each of the antenna’s installation locations. At no time should a connectivity modules antennas be installed within 20cm of another antenna (excluding ground planes) or the certification license(s) labeled on the connectivity module will be void.
FEDERAL COMMUNICATIONS COMMISSION
Certification Labeling
NOTICE:
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>