Shenzhen You Me Electronics T3-A 3 IN 1 Foldable Charging Station User Manual
- June 12, 2024
- Shenzhen You Me Electronics
Table of Contents
Shenzhen You Me Electronics T3-A 3 IN 1 Foldable Charging Station
Product Description
This device is a 3 in 1 fast wireless charger which can support power charging
for apple phone/iWatch/Air Pods. Also nightlight design is special and more
practical. his product adopts folding design. The folding method of the
product is more convenient for storage and carrying. It can charge multiple
devices at the same time Place the device in the charging area to wirelessly
charge the device. You can Place the phone vertically without affecting the
charging of the phone, and you can video chat or watch your favorite movies
while charging.
Specifications
| Name | 3 in 1 Charging Station |
|---|---|
| Using Type | Foldable & Portable |
| Material | Plastic + Acrylic |
| Colour | Black & White |
| Charging Port | Type-C |
| input Current | =9V-2A,5V-3A,12V-1.5A |
| Phone Output | 12W/10W/5W |
| Watch Output | 2.5W |
| Air Pods | A |
| Adapter | ?- 18W |
| Inch | 165141.313mm |
Operation Steps
-
Please firstly power on the device by our provided power cable.
-
Turn on / off nightlight by the nightlight power button.
-
When charging devices such as mobile phone, iWatch or bluetooth headsets, just place these devices on the charging area and they will be charged only after 0.1 second. When the devices are full charged or you want to terminate charging, just take them away from charging area Wireless charging for mobile phone, iWatch and TWS bluetooth headsets
-
When the device is open, the mobile phone could be charged in horizontal direction.
-
The product can be folded for easy storage and carrying
Precautions
- It is forbidden to immerse the device in water to avoid short circuit of the internal circuit.
- It is forbidden to disassemble or beat the device by yourself to avoid to damage the device.
- Please place the device away from flammable and explosive liquids, gases or explosives.
- Do not place magnetic cards, magnetic stripe media and precision machinery too close to the device.
- Please use the charger included in the packaging or a 5V/3A charger.
FCC Warning
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body
FCC ID:2A4N3-T3-A