ZADEZ M352 Bluetooth and Wireless Mouse User Manual
- June 4, 2024
- ZADEZ
Table of Contents
ZADEZ M352 Bluetooth and Wireless Mouse User Manual
Product Overview
Note for button “Pair/ Mode”
- Short press: Pair switch
- Long press: Mode switch
- With USB receiver for 2.4G wireless mode;
- With low power indicator;
- Without dongle needed when Bluetooth mode;
- Automatic power-saving mode with 3 levels
- Independent power ON/OFF switch
- Battery needed: 1*AA battery
Main Specifications
- Frequency: 2402-2480 Mhz;
- Bluetooth version: 5.0 & 3.0
- Mouse size: 11073.643.8 mm
- Working distance: 10 meters
- Working angle: 360 degree
- Resolution: 800/ 1200/ 1600 DPI
Installation-2.4G/ Bluetooth
Step 7: Input the battery into the battery slot on the bottom of the
mouse according to the polarity;
Step 2: Turn the power switch on the bottom of the mouse to the ON
position.
Step 3: Plug the nano receiver into the USB of computer. In seconds, 2.4G
wireless setup will finish automatically and then you can work freely.
(Default: 2.4G mode)
Change to Bluetooth Mode, then
Step 7: Short press “Pair/Mode” button, the mode will be switch to
Bluetooth mode (BT3.0 or BT5.0). The mode indicator LED will be light.
Step 2: Long press “Pair/Mode” button in 3 seconds, the LED lights will
be quick flash, which means into pairing status.
Step 3: Turn on the computer Bluetooth program and will find the new
Bluetooth device name “BT3.0 M352” or “BT5.0 M352”.
Step 4: As suggestion, pls kindly kindly pair the device “BT5.0 M352
“ and finish the connecting. Then Bluetooth setup is okay and you can work
freely. In case, you can not connect “BT5.0 M352” successfully, then
please pair with “BT3.0 M352” .
Remarks
- This mouse can connect by 2.4G or Bluetooth. But it can only connect by one of them at the same time, 2.4G or Bluetooth connection.
- Wake-up the sleeping mouse or re-operating the mouse after switch off , it will connect by previous mode, 2.4G or Bluetooth automatically.
- Low power indication: when battery is in low power, the LED light will flash once every 5 seconds, which reminds you to take new battery instead.
Package Contents
- 01 Mouse.
- 01 Nano receiver.
- 01 Instruction manual.
- 01*AA battery.
System Requirements:
- Win7 (64bit)/ Win 8/8.1/10 and Mac 10.X
FCC Warning
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guaranteethat interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which predetermined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2A8LO-M-352
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>