KLARSTEIN 10034670 Stand Fan User Manual

KLARSTEIN 10034670 Stand Fan

SAFETY INSTRUCTIONS

• Remove the packaging and make sure that the appliance is intact. If in doubt, do not use it and contact qualified personnel only.

• Packaging materials (plastic bags, polystyrene, staples etc.) Must be kept out of the reach of children as they could be hazardous.

• This device may be only used by children 8 years old or older and persons with limited physical, sensory and mental capabilities and / or lack of experience
  and knowledge, provided that they have been instructed in use of the device by a responsible person who understands the associated risks.

• Before connecting the appliance, check that the appliance rating corresponds to the mains rating.

• This appliance must only be used for the purpose for which it has been manufactured. As a stand fan. The manufacturer is not responsible for any damage caused by improper or incorrect use.

• The installation/assembly of the device will be made according to the indications of the manufacturer. A wrong procedure may cause damages to persons, animals or objects, for which the manufacturer cannot be considered responsible

• Before cleaning or carrying out maintenance on the appliance, disconnect it from the electrical mains by removing the plug from the electrical outlet or by switching off the system switch.

• If the appliance is faulty and/or operating incorrectly, switch it off without tampering with it. If the above is disregarded, the safety of the appliance may be compromised.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Do not power the device using multiple sockets.

• Do not use adapters and/or extension cable

• The device must not be switched on using external timers and/or other remote control devices which are not specified in this manual.

• Do not use or store the device near heat sources (heaters, stoves).

• Do not dip the device in water or other liquids; in case the accidental fall in the water do not try to take it out, but first of all unplug immediately the power cable from the socket.

• If you use the device for the first time, make sure to remove any label or protective sheet which blocks its proper functioning.

• Plug and unplug the power cable with dry hands and hold it firmly.

• Before plugging the plug into a wall outlet, make sure that the unit is switched off.

• Always unplug the power cable to avoid the overheating and avoid stretching it.

• Make sure that all air intakes and outlets are free and not covered so that the unit does not overheat.

• Avoid placing the power cable on abrasive or sharp surfaces or in positions where it can be damaged easily.

• Do not hang the fan on the wall or ceiling unless this type of installation is provided and explained in this manual.

• Place the device at a proper distance from the objects or surrounding walls making sure that its functioning will not cause accidental damages.

• Do not use the device near gas stoves or open flames in general.

• Do not use the device near curtains or textiles.

• Do not cover the device during functioning.

• Do not expose yourself for a long period to the air flow generated by the device because it can cause damage to the health

• If the fan must be stored for a long period and is not used regularly, place the fan in its original packaging in a dry place.

• Always remember to unplug the power cable of the device if it is not used for a long period, before storing, cleaning or performing any maintenance operation.

• Do not use the appliance in the presence of potentially flammable or explosive liquids or gases.

• This product is intended for household use only and not for commercial / industrial or outdoor use.

SINGLE PARTS

PRODUCT OVERVIEW

ASSEMBLY

Installation of the protective grilles

• Mount the front guard grille as shown in the Device Overview and then rotate it clockwise to bring the positioning point into a vertical position.
• Tighten the screws to complete the installation.

Installing the Base

Place the connecting tube on the base. Insert the Allen screw M6 into the base from below and tighten the screw clockwise with the Allen wrench.

Installing the Power Supply

• Plug one side of the power cord into the rectangular connector on the base of the unit.
• Plug the power plug at the other end of the power cord into the wall outlet. A beep will sound as soon as the unit is connected.

Installation of the fan head

• Place the fan head on the capillary tube by aligning the groove on the capillary tube (see figure).
• Tighten the capillary tube nut. Finish installing the fan head by making sure it does not wobble.

DISPLAY AND KEY FUNCTIONS

Control panel

1. On/Off
2. Swing
3. Speed
4. Indicator light

Display

1. Sleep mode
2. Normal mode
3. Timer
4. Swing angle
5. Natural mode
6. Timer/Speed
7. Battery level indicator
8. On/Off

Remote Control

1. Transmitter
2. Timer
3. Increase speed
4. Mode
5. Decrease speed
6. On/Off
7. Swing

OPERATION

Switch device on/off

• Press the ON/OFF button on the fan head. A beep will sound and indicate that the fan is starting.
• The speed controller lights up, the fan symbol in the digital display lights up and the fan starts operating.
• Press the button again to switch off the fan.

Setting the speed

Press the SPEED button repeatedly to select the speed level from 1 to 12. There is a display on the fan head indicating the currently set speed.

Start swing function

Press the SWING button on the fan head. A beep will sound and the fan will begin to oscillate back and forth. The default angle is 30°. The swing indicator lights up and the green circle of the digital indicator lights up. Press and hold this button to stop the oscillation.

Setting the swing angle

Press the SWING button on the fan head. A beep will sound and the fan will begin to oscillate back and forth. The default angle is 300°. The swing indicator lights up and the green circle of the digital indicator lights up. Press the SWING button several times to select one of the following swing angles: 30° > 60° > 90° > 120°. The green circle of the digital display changes accordingly. Press and hold this key to end the swing function.
Note: The same setting is made on the remote control.

Setting the timer

Press the TIMER button on the fan head. As soon as the time indicator lights up after the beep, you can set the off timer. Press the button repeatedly to set the timer between 0 and 12 hours.

• From 0-6 hours, the time can be set in 0.5-hour increments.
• From 6-12 hours, the time can be set in 1-hour increments.
• If you select 0 hours, the timer function is cancelled.

Note : When setting the timer using the remote control, first press the TIMER button and then use the (+) or (-) buttons to set the desired time. Wait 6 seconds until the set time is automatically set.

Set mode

Press the MODE button repeatedly to set one of the following modes: Natural Mode > Sleep Mode > Normal Mode. Depending on the mode, the fan speed will vary/change at certain intervals.

Wireless use(applies only to the wireless model)

Unplug the power cord from the outlet and remove the power cord from the base. Press the battery control button on the base. A beep will sound, indicating that the unit is now powered by the built-in battery. Press the ON/OFF button on the fan head or remote control to start the fan.

CLEANING AND CARE

• Switch off the fan before cleaning and unplug it from the wall outlet.
• Remove the front grille, rear grille and fan blades by loosening the nuts as shown:
• Wipe the surface with a damp cloth. Do not clean with hard objects such as steel wool or caustic detergents such as disinfectants to avoid surface scratches and damage.
• To move the unit, unplug it from the wall outlet first.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of our fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service. This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.

MANUFACTURER & IMPORTER (UK)

Manufacturer:

Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom

TECHNICAL DATA

www.klarstein.com

References

• Klarstein | Your home. Your kitchen. Your style.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>