Immax 08487L Outdoor Solar Light User Manual
- June 9, 2024
- immax
Table of Contents
Immax 08487L Outdoor Solar Light
TECHNICAL PARAMETERS
- Code: 08487L
- Solar panel: monocrystalline silicon 5V/2W
- Battery: 18650 lithium iron phosphate battery 3.2V/1300mAh
- Charging time: 4-5 hours
- Working time: 10-12 hours (depending on battery charge)
- Degree of protection: IP54
- Function: light sensor
- Chromaticity: 6000-6500K / 3000-3500K
- Material: ABC+PC
Please read the user manual carefully before installing the solar light. And follow the given instructions.
Allow the solar light to be sufficiently charged in sunlight before first
use and at least 4-6 hours.
The light is charged during the day and turns on automatically after
dark.
If the solar light does not work properly or its working time is short, please
place it directly in the sun and let it charge in direct sunlight for 2 days.
Do not turn on the solar light during this process. The battery should be
fully charged.
NOTICE
- Install the product preferably in places where there are no trees, gutters and other obstacles, which could block sunlight. If it doesn‘t have a solar panel enough sunlight, it will affect the lighting time.
- Do not install the product under other lamps. Illumination generated by other fixtures can cause that the product will not work or flashes.
- The product has a light sensor, use it where there is no light.
- Rainy, foggy or cloudy weather will affect the charging of the lamp, the working time will be shortened.
- The performance of the solar reflector depends on the surroundings, latitude, seasons, etc.
- Install the product preferably in places where there are no trees, gutters and other obstacles, which could block sunlight. If it doesn‘t have a solar panel enough sunlight, it will affect the lighting time.
- The solar reflector contains batteries, please recycle the batteries in accordance with the relevant laws and regulations of the user‘s country or region.
- Do not immerse the solar panel in water
MAINTENANCE
In order for the photovoltaic panel to receive maximum solar radiation, keep the solar panel clean – wipe it with a soft, damp cloth. Avoid abrasive and cleaning agents!
Package contents
- 1x Solar reflector
- 1x Assembly instructions
- 2x screw
- 2x dowel
ON/OFF CONTROL
- One press of the switch – the light turns on at 100%
- The second press of the switch – the light turns on at 50%
- The third press of the switch – the light turns off
- Press for 2-3 seconds to change the chromaticity. Warm/cool light color
INSTALLATION MANUAL
- Using a paper template, mark the position where the holes are to be drilled.
- Drill the Aku holes with a drill
- Insert dowels into the drilled holes and screw in the screws
- Switch on the lamp and fasten only with screws
Manufacturer and importer: WPB CZ, s.r.o. Pohoří 703, 742 85 Vřesina, Czech Republic
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>