OPT7 2016-2019 Honda Civic Sedan Tail light Installation Guide

June 9, 2024
OPT7

HONDA CIVIC SEDAN TAIL LIGHTS
2016-2019

WHAT′S INCLUDED

OPT7 2016 2019 Honda Civic Sedan Tail light - Whats
Included

TOOLS NEEDED

****10mm Socket

|

OPT7 2016 2019 Honda Civic Sedan Tail light - Tools Needed
2Philip Screwdrivers

---|---

OPT7 2016 2019 Honda Civic Sedan Tail light - Tools Needed
3 10mm Socket Wrench

|

OPT7 2016 2019 Honda Civic Sedan Tail light - Tools Needed
4Flathead Screwdrivers

INSTALLATION

■ STEP 1
– First pop open the vehicle’s trunk.
– Then, use a FLAT-HEAD screwdriver to remove all of plastic fasteners (9X) from the inner lining.
– Peel off the inner lining.

OPT7 2016 2019 Honda Civic Sedan Tail light - STEP 1

■ STEP 2
Next, remove the 10mm bolts
(2X) on the sides and the nut bolt
(1X) with a HEX- SOCKET wrench.

OPT7 2016 2019 Honda Civic Sedan Tail light - STEP 2

■ STEP 3
– Locate the white clip that is securing the wiring harness and release it.
– Next, unplug the connection from the OEM tail light.

OPT7 2016 2019 Honda Civic Sedan Tail light - STEP 3

■ STEP 4
Pull the inner tail light outward to pop out the OEM tail lights from the frame of the vehicle.

OPT7 2016 2019 Honda Civic Sedan Tail light - STEP 4

■ STEP 5
– Grabbing the new inner tail light and put it back on the seat and reconnect the wiring harness.
– Then re-install the bolts(2X)/nut (1X) that were removed.
– Repeat the same steps for the other side.

OPT7 2016 2019 Honda Civic Sedan Tail light - STEP 5

■ STEP 6
Remove the 8mm mounting bolts (2X) with a bolt screw-driver.

OPT7 2016 2019 Honda Civic Sedan Tail light - STEP 6

■ STEP 7
Carefully, pull out the outer tail light, so that it is able to pop out of the fixed chassis.

OPT7 2016 2019 Honda Civic Sedan Tail light - STEP 7

■ STEP 8
Disconnect all OEM tail light harness.

OPT7 2016 2019 Honda Civic Sedan Tail light - STEP 8

STEP 9
Reconnect all OEM tail lights harness to the new outer tail light.

OPT7 2016 2019 Honda Civic Sedan Tail light - STEP 9

STEP 10
– Line up the mounting tabs and push rearward to seat in place.
– Next, re-install the bolts (2X) that were previously removed.
– Repeat the same steps for the other tail light.

OPT7 2016 2019 Honda Civic Sedan Tail light - STEP 10

STEP 11
– Close the trunk and check that all of the lights are working properly.
– Now, let’s enjoy the new tail lights.

OPT7 2016 2019 Honda Civic Sedan Tail light - STEP 11

DISCLCIIMER

OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals