GOLDEN LIGHTING 2072-FM41 41 Inch Wesson Flush Mount Instruction Manual
- June 9, 2024
- GOLDEN LIGHTING
Table of Contents
GOLDEN LIGHTING 2072-FM41 41 Inch Wesson Flush Mount
Thank You for Choosing Golden Lighting for Your Lighting Needs!
-
Pendants & Linear Pendants Above a Kitchen Island
Center a linear pendant over the island. If hanging pendants, use one pendant for every 24″ of island. Fixtures should hang at least 30″ above the countertop. -
Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30″ above the table. Use a fixture that is 12″ narrower than the width of the table. -
Pendants and Chandeliers in Open Areas
The bottom should hang at least 7.5 feet from the floor. Allow clearance for any opening doors.
We appreciate your business and hope you love your new light!
Great lighting can add value and enhance the look of your home. To ensure the
best lighting in your space, remember to layer your lighting. This ensures
that your space will have both task and ambient lighting. Coordinating
fixtures like sconces, flush mounts, and pendants can help you meet your
layered lighting needs and reinforce your desired aesthetic. Install the
lights with dimmers that allow you to control the level of light output at any
given moment.
Get function and style! Browse our site for coordinating lights and expert
lighting advice. To help create the perfect look, visit
www.GoldenLighting.com.
Love your light and want to show it off?
Follow us, share a picture, and tag us on Social…
- @GoldenLighting
- @GLFixtures
- @GoldenLighting1
- @GoldenLighting
Assembly Instructions: 2072-FM41
How to Identify the Fixture’s Wires
- Hot: Smooth, Black, or Transparent with Black Inner Thread
- Neutral: Ribbed, White or Transparent with White Inner Thread
- Ground: Copper, Bare Metal, Green, or Transparent Inner Thread
Get help, quick tips, and explore curated content
For Customer Service, contact the place of purchase to arrange for replacement parts.
IMPORTANT
- All installation work should be done by accredited professional.
- Shut off power supply at fuse or circuit breaker!
- Use only the specified bulbs. Do not exceed the maximum wattage!
Assembly Instructions
PREPARING FOR INSTALLATION
Carefully remove the new fixture from the carton as well as the yellow bag
that holds all of the parts. See the important notes above. Shut off power at
the circuit breaker and remove old fixture from wall, including the old
mounting strap. 1. Take the mounting strap assembly from the parts bag.
Mounting strap (B) contains several threaded holes. Two sets of mounting
screws (A & D) should be attached to mounting strap (B). You may need to
tighten nuts (C) that hold mounting screws (A) in place. If the screws are not
attached, please hold canopy (F) up to mounting strap (B). Line up the holes
in canopy (F) with the holes in mounting strap (B) and insert mounting
screws(A) into mounting strap (B) so that mounting screws (A) protrude through
the holes in canopy (F). Mounting screws (A) are long, so please test the
canopy against the mounting strap to see how far you should insert the screws.
Remove the canopy (F) and then tighten nuts (C) onto mounting screws (A) to
hold the screws in place. 2. Place mounting strap (B) over the junction box
and secure in place with mounting screws (D). Tighten the screws securely with
a screwdriver. Pull the house wires through the center of the mounting strap
(B).
ASSEMBLING THE FIXTURE
No Assembly Required – This item arrives assembled and ready for installation.
Please proceed to the next step.
CONNECTING THE WIRES
3. Have an assistant support the fixture’s weight while completing the
wiring. Refer to the wiring diagram and attach the fixture’s wires to the
power supply wires from the junction box. Attach the fixture’s wires to the
power supply wires from the junction box. Connect Hot to Hot (transparent wire
with black inner thread, black, or smooth wire) Neutral to Neutral
(transparent wire with white inner thread, white, or ribbed wire), and Ground
to Ground (transparent wire with green inner thread, green wire, or copper).
Twist the ends of the wire pairs together, and then twist on a wire connector.
Make sure all twists are in the same direction. If there is no house ground
wire coming from the junction box, locate ground screw (E) on the mounting
bracket/mounting strap and wrap the fixture’s ground wire around the ground
screw. Use a screwdriver to tighten the top of ground screw (E) onto the wires
and into the mounting bracket/mounting strap. Tuck the wires into the junction
box.
FINISHING THE INSTALLATION
4. Hold the canopy (F) over mounting strap (B) so that the holes in the
mounting strap (B) line up with the holes in the canopy (F). Thread the deco
nuts (G) onto exposed threads of the mounting screws (A) until canopy (F) is
snug against the ceiling. 5. Install light bulbs (not included) into sockets
(I) in accordance with the fixture’s specifications. Do not exceed the maximum
recommended wattage. Your installation is now complete. Turn on the power and
test the fixture.de cables. Asegúrese de que todos los giros estén en la misma
dirección. Si no hay un cable de tierra de la casa proveniente de la caja de
conexiones, ubique el tornillo de tierra (E) en el soporte de montaje / correa
de montaje y enrolle el cable de tierra del dispositivo alrededor del tornillo
de tierra. Utilice un destornillador para apretar la parte superior del
tornillo de tierra (E) en los cables y en el soporte de montaje / correa de
montaje. Meta los cables en la caja de conexiones.
TERMINANDO LA INSTALACIÓN
4. Sostenga la capota (F) sobre la correa de montaje (B) de modo que los
orificios de la correa de montaje (B) se alineen con los agujeros de la capota
(F). Enrosque las tuercas decorativas (G) en las roscas expuestas de los
tornillos de montaje (A) hasta que la cubierta (F) esté ajustada contra el
techo. 5. Instale bombillas (no incluidas) en los enchufes (I) de acuerdo con
las especificaciones del dispositivo. No exceda la potencia máxima
recomendada. Su instalación ahora está completa. Encienda la alimentación y
pruebe el dispositivo.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>