beper P102FRU200 4 In 1 Hand Blender Set Instruction Manual
- June 8, 2024
- beper
Table of Contents
P102FRU200 4 In 1 Hand Blender Set
Instruction Manual
P102FRU200 4 In 1 Hand Blender Set
For further information and/or for instructions for use in other languages , please visit: beper.com
Precautions
Read the following instructions carefully, since they give you useful safety
information about installation, use and maintenance and help you avoid mishaps
and possible accidents.
Remove the packing and make sure that the appliance is intact, with special
attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be
accessible to the children, in order to preserve them from danger sources. It
is recommended not to throw these packing material in the domestic waste, but
to deliver them to the appropriate station of collection or destruction
refusals, asking eventually information to the manager of the Sanitation
Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds
to the data specified on the label. The appliance can be damaged if the
voltage is not correct. If the plug does not suit the socket, let it be
replaced with another suitable plug by qualified personnel only, which shall
also ensure that the section of the socket cables is suitable for your
appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not
recommended; should they be necessary, please use only simple or multiple
adaptors and extensions in compliance with the safety rules in force, making
sure that the capacity absorption limit marked on the simple adaptors and the
extensions and the maximum power limit marked on the multiple adaptor are not
exceeded.
Do not use the appliance if the cable or the plug shows any damages. Do not
use the appliance after a possible irregular working. In this case, switch it
off and do not break it open. Refer to an authorized Beper after-sale service
for repair and require original spare parts only. Failing to follow these
instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is
to be considered as improper and thus dangerous. The manufacturer cannot be
responsible for any damages deriving from impro- per, wrong or incautious use.
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any parts of
the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable materials, gases or
burning flames.
Do not allow children, disabled people or every people without experience
or technical ability to use the appliance if they are not properly watched
over. Close supervision is necessary when any appliance used by or near
children.
Warnings for use
Before using the hand blender check the integrity of the appliance and cord
supply.
Be careful when using the hand blender, the blade is very sharp.
Before removing the ingredients from the blade, unplug the appliance from the
socket.
Do not keep the hand blender on for more than 30 seconds, to avoid
overheating, and wait at least for 5 minutes before using it again.
Use the hand blender on a horizontal, dry and stable surface.
Do not immerse the main unit into water or other liquid.
Do not use the hand blender with wet hands and/or bare feet.
Before assembly, disassembly or clean, unplug the appliance from the socket.
Before using the hand blender, allow the ingredients to cool (maximum
temperature 60 ° C).
Description
Fig. A
- Speed selector I
- Turbo speed selector
- Main unit
- Removable shaft
- Removable whisk attachment
- Stainless steel whisk
- Graduated baker
- Food chopper lid
- Food chopper blades
- Food chopper canister
Instruction for use
Assembly the hand blender
Insert the shaft on the main unit, and screw.
To remove the shaft, unscrew from the motor and separate the two components.
How to use the hand blender
After assembly the hand blender and check it is correctly assembled, connect
the power cord to the socket.
To turn on the product, press the button of the desired speed.
The stainless steel blade allows to chop the ingredients into the container.
To get better results, it is necessary to give to the hand blender a rotating
movement into the container. For a correct functioning of the blades it is
necessary to have a liquid part. At the same time it is necessary to keep the
blade completely immerse into the ingredients to avoid splash.
If during blending, the normal rotation of the blade is blocked or obstructed
by food, turn off the blender and unplug the power cord from the electrical
outlet. Free the blades from the food and resume processing.
Foods can be processed directly in the measuring cup, taking care not to fill
it over the 700ml limit.
Assembly and operation of the stainless steel whisk
Insert the whisk attachment into the main unit, screw the parts together. Then
insert the stainless steel whisk.
To disassemble the attachment, unscrew the assembly mechanism and separate the
two components.
After checking the correct assembly of the steel whisk, insert the power cable
into the electrical socket and proceed with switching on the product.
The stainless steel whisk allows you to mix, beat and whip.
After use, disconnect the power cord from the electrical outlet, remove the
whisk and the attachment.
Assembly and operation of the chopper
Place the container on a stable and horizontal surface.
Insert the stainless steel blades and put the food to be processed in the
container.
Place the lid over the container and lock it.
Checked the correct assembly of the chopper, insert the power cable into the
electric socket and operate the product.
The chopper is ideal for mincing, crumbling and shredding a wide variety of
foods: meat, bread, fruit, cheese and vegetables.
To obtain well-chopped, creamy and fine food, distribute the food evenly
inside the container.
Insert 10-20 mm thick pieces of meat into the container, without bones or
muscles.
Do not chop hard foods such as frozen foods, ice, grains, spices and coffee.
After use, disconnect the power cord from the electrical outlet, unlock the
motor body from the cover. Remove the lid from the container.
Remove the blade by taking it from the upper end, being careful not to cut
yourself. Remove the food from the container.
Cleaning
Before cleaning the hand blender, unplug the cord supply from the socket.
The motor unit can be cleaned with a soft cloth and hot water.
Do never use thinners, abrasive detergent in general, detergent for plastic,
glass or other, that could damage the hand blender.
Do not put liquids into the hand blender.
Do not immerse the main unit into water or other liquids, do not rinse with
water.
Clean the blending attachment with running water.
Be careful to the stainless blade that is very sharpen and cutting.
Technical data
Power: 300-400W
Power supply : 220-240V ~ 50-60Hz
For any improvement reasons, Inside reserves the right to modify or improve
the product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original
purchase a 24 month guarantee applies to material and production defects. The
purchase receipt and the guarantee certificate must be submitted together in
case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of
purchase (fiscal receipt) indicating the date of purchase and the model of the
appliance
For any technical assistance, please contact directly the seller or our head
office in order to preserve the appliance’s efficiency and NOT TO void the
guarantee. Any intervention on this appliance by non-authorized persons will
automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or
production during the period of guarantee, we guarantee repair free of charge
on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs
of use in consumable products (such as lamps, batteries, heating elements…)
the aesthetic parts are excluded from the guarantee, and any defect whatsoever
resulting from non-respect of the rules for use, negligence in usage and/or
maintenance of the appliance, carelessness, wrong or improper installation,
damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the
appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is
an accessory and/or a detachable part of the product, Beper reserves the right
to replace only the very part in question and not the entire product
Contact your distributor in your country or after sales department Beper.
E-mail [email protected] which will forward
your enquiries to your distributor.
CUSTOMER CARE BEPER
http://customercare.beper.com/support/home
BEPER SRL
Via Salieri, 30 – 37050
Vallese di Oppeano – Verona
Tel. 045/7134674
Fax 045/6984019
beper.com Cod.: P102FRU200