Ardes AR5A35 Floor Fan Instructions
- June 8, 2024
- Ardes
Table of Contents
Ardes AR5A35 Floor Fan
This appliance may be used by children 8 years of age and older and people with reduced physical, sensory or mental capacities or with a lack of experience and knowledge if they are adequately supervised or have been instructed on the safe use of the appliance and are aware of the related dangers. Children must not play with the appliance. Cleaning and maintenance operations must not be performed by children without supervision. If the power cable gets damaged, it has to be replaced only at a service centre approved by the manufacturer in order to prevent any risks. DO NOT disassemble the fan: this fan cannot be disassembled.
Warnings
ATTENTION : read this booklet carefully it contains important
instructions for a safe installation, use and maintenance. Important
instructions to be kept for future reference.
It is forbidden for the children to play with the device. This device must be
used only for the purpose it was expressly designed; any use not complying
with the instructions contained in the manual is considered inappropriate and
dangerous. The manufacturer is not responsible for possible damages caused
byInstructions for use the inappropriate and/or unreasonable use. This device
is NOT suitable to use it in an explosive environment (in the presence of
flammable substances such as gas, vapor, mist or dust, in atmospheric
conditions when, after ignition, the combustion is spread in the air).
The packing materials (plastic bags, expanded polystyrene, etc.) must be kept
out of the reach of children or disabled persons since they represent
potential sources of danger.
The installation/assembly of the device will be made/ or according to the
indications of the manufacturer. A wrong procedure may cause damages to
persons, animals or objects, for which the manufacturer cannot be considered
responsible. Place and use the device on a horizontal and stable surface.
Before use check the integrity of the device and power cable. In case you are
not sure contact a qualified person. Before powering the device make sure the
rating (voltage and frequency) corresponds to the grid and the socket is
suitable for the plug of the device. Make sure the power system is equipped
with proper protection according to the law in force. DO NOT power the device
using multiple sockets. If possible, avoid the use of adapters and/or
extension cables; if their use is absolutely necessary, use only materials in
compliance with the current safety regulations and according to the electrical
parameters of the adapters. The device must not be switched on using external
timers and/or other remote control devices which are not specified in this
manual. DO NOT use or store the device near heat sources (heaters, stoves
etc.). DO NOT dip the device in water or other liquids; in case the accidental
fall in the water DO NOT try to take it out, but first of all unplug
immediately the power cable from the socket. If you use the device for the
first time, make sure to remove any label or protective sheet which blocks its
proper functioning. Plug and unplug the power cable with dry hands and hold it
firmly. Before plugging make sure the start button of the device is in the
“OFF” position (turned off). Always unplug the power cable to avoid the
overheating and avoid stretching it (do not pull it, tug it or use it to drag
the device to which is connected). Avoid placing the power cable on abrasive
or sharp surfaces or in positions where it can be damaged easily. DO NOT
obstruct totally nor partially the air vents or inserts objects inside. During
the functioning do not touch the device with wet body parts, and in any case
it is recommended to have between you and the standing surface, an isolating
element (for example wearing shoes with rubber soles). During the use the
device must be keep at a safety distance from any object and/or flammable or
potentially explosive substance.
In case of malfunction or anomalies during the functioning, switch off the
device immediately, turn off the power and check the cause of the anomalies,
if possible, with the support of a qualified person. Avoid carrying out
operations which are not specified in this manual (such as disassembling
and/or altering). Always remember to unplug the power cable of the device if
it is not used for a long period, before storing, cleaning or performing any
maintenance operation. Store and use the device only indoor or in any case
protected from weathering such as rain, direct radiation of the sun and dust.
The device is not design for the external use or storage. The cleaning and
maintenance of the device MUST NOT be done by children without the supervision
of an adult. Before unplugging the device, switch it off, using the proper
command on the control panel. DO NOT hang the fan on the wall or ceiling
unless this type of installation is provided and explained in this manual.
Place the device at a proper distance from the objects or surrounding walls
making sure that its functioning will not cause accidental damages. DO NOT use
the device near gas stoves or open flames in general. DO NOT use the device
near curtains or textiles. DO NOT hang the fan on the wall or ceiling unless
this type of installation is provided and explained in this manual. DO NOT
cover the device during functioning. DO NOT insert objects or body parts
inside the protection grille of the fan. DO NOT leave the device unsupervised
for a long period during functioning.
DO NOT expose yourself for a long period to the air flow generated by the
device because it can cause damage to the health. If the fan must be stored
for a long period and is not used regularly, place the fan in its original
packaging in a dry place. When you use it for the first time after a long
period of inactivity, make sure the fan is clean and the motor blades turn
feely (with the device not powered) without any restraint.
Technical informations
- On / Off / Speed knob
- Blades
- Grid
- Main body
- Supports
Instructions for use
Support assembly.
Caution! The fan should always be switched off and does not connected to
the mains supply, if you mounting the fan.
To fix the supports to the main body:
- set the fan gently on the head. Use a soft surface to not damage the top of the product.
- take care on the indication of the supports: “L” is the left support, “R” is the right support. The “FRONT” indicator with the arrow on both supports indicates the front side;
- slide the supports on the main body.
Pay attention that all the parts are correct and firmly connected with each
other.
Caution! Connect to the mains supply only after the fan has been fully
assembled. The fan must not be used without supports.
Place the fan on a dry and stable surface, make sure the on/off/speed knob is
in off position (0) and insert the plug on the socket. Turn the on/off/speed
knob to select the desired speed:
- 0 – Off
- 1: Low speed
- 2: Middle speed
- 3: High speed
You can vertically point the head of the fan choosing the desired angle manually. It is sufficient to move the front of the fan up or down according to the desired slope.
Maintenance
Before carrying out the regular cleaning operations turn off the fan and unplug it. DO NOT disassemble the fan: this fan cannot be disassembled. For external cleaning use a soft and dry cloth. DO NOT dip the device in water, or splash it with any other liquids. DO NOT use solvents or any other chemical products for cleaning it. When you do not use it, after cleaning it, store the fan in a dry place.
GUARANTEE
Terms and Conditions
The guarantee is valid for 24 months.
This guarantee applies only if it has been duly filled in and is submitted
with the receipt showing the date of purchase. The guarantee covers the
replacement or repair of parts making up the appliance which were faulty at
source due to manufacturing faults. After the guarantee has expired, the
appliance will be repaired against payment. The manufacturer declines any
responsibility for damage to persons, animals or property due to misuse of the
appliance and failure to observe the directions contained in the instructions.
Limits
All rights under this guarantee and any responsibility on our part will be
voided if the appliance has been:
- mishandled by unauthorized persons
- improperly used, stored or transported.
The guarantee does not cover damage to the outward appearance or any other
that does not prevent regular operation.
If any faults should be found despite the care taken in selecting the
materials and in creating the product, or if any information or advice are
required, please contact your local dealer.
DISPOSAL
USER INFORMATION
“Implementation of Directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE)”, pertaining to reduced use of hazardous substances in
electrical and electronic equipment, as well as to waste disposal. The symbol
of the crossed-out wheelie bin on the equipment or on its packaging indicates
that the product must be disposed of separately from other waste at the end of
its service life. The user must therefore take the dismissed equipment to
suitable separate collection centres for electrical and electronic waste. For
more details, please contact the appropriate local authority.
Suitable segregated collection of the equipment for subsequent recycling,
treatment or environmentally-friendly disposal helps prevent damage to the
environment and to human health, and encourages the re-use and/or recycling of
the materials that make up the equipment. Abusive disposal of the product by
the user shall result in the application of administrative fines in accordance
with the laws in force.
Poly Pool S.p.A. Via Sottocorna, 21/B
24020 Parre (Bergamo) – Italy
Tel. +39 035 4104000 r.a. – Fax +39 035 702716
http://www.ardes.it – e-mail:
polypool@polypool.it
MADE IN CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>