marta MT-2072 Food Processor User Manual
- June 10, 2024
- MARTA
Table of Contents
marta MT-2072 Food Processor
Product Information
The MT-2072 is a food processor that helps you to chop, whisk and grind
ingredients. The food processor comes with various attachments such as the
chopper blade, whisk attachment, and chopper cup. It has a power supply of 230
V ~ 50 Hz and a rating power of 150 W. The maximum power of the food processor
is 500 W. It has a net weight of 1.03 kg and gross weight of 1.18 kg. The
package size of the food processor is 170 mm x 150 mm x 265 mm.
Product Usage
Before First Use
Before using the food processor, it is essential to read the user manual
carefully. Ensure that all the parts are correctly assembled and securely
locked in place before using the appliance for the first time.
Instruction for Use
Do not process, crush or grind hard items such as frozen food, ice, cereals, rice, spices, and coffee to avoid damaging the blades. The type of food and preparation required for it are as follows:
| Type of Food | Preparation | Max amount at one time | Time approximate |
|---|---|---|---|
| Parsley | Cut into 2 cm pieces | 50 g | 5 short bursts or 5 sec. |
| Onions | Peel and cut into 2-3 cm pieces | 350 g | 15 short bursts or 10 sec. |
| Garlic | Peel | 200 g | 5 short bursts |
| Peanuts | Remove the shell | 150 g | 5 sec. |
| Bread | Cut into 2 cm pieces | 100 g | 3 short bursts |
Cleaning and Maintenance
Before cleaning the food processor, ensure that it is unplugged from the power supply. Clean the appliance with a damp cloth and mild detergent. Do not immerse the motor block in water. Rinse and dry all the parts thoroughly before assembling them back. It is recommended to clean the food processor immediately after use to avoid any stains or residues.
Description
- Operating button
- Motor block
- Chopper blade
- Whisk attachment
- Chopper cup
CAUTION
- Read this manual carefully before using the appliance and save it for future reference.
- Before the first use, check the device specifications and the power supply in your network.
- It is not intended for industrial use.
- For indoor use only. Use only for domestic purposes according to the instruction manual.
- Keep the power cord away from sharp edges and hot surfaces.
- Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.
- Never attempt to frame and repair the appliance by yourself. If you meet problems, please contact the nearest customer service center.
- Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
- Always unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
- To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Be cautious when using blade.
- Every time after use, make sure the appliance is turned off, the blades stopped completely. Only then open the lid.
- Do not overload the appliance. The appliance is designed for processing relatively small quantities of food and maximum quantities given in the table should not be exceeded.
- Never blend hot liquids!
- Maximum time of continuous operation – no more than 1 minute with an interval for at least 5 minutes.
- Do not use the device if the cord is damaged.
- Do not use the device if the cup is empty.
- Do not leave the device unattended.
- Always disconnect the device from power supply if you do niot use it and before cleaning.
BEFORE THE FIRST USE
• Please unpack your appliance and remove all packing materials
• As with all appliances for the preparation of foodstuffs, it is advisable to
clean those parts, which come into contact with food before using for the
first time.
• Do not immerse motor unit into water.
INSTRUCTION FOR USE
CHOPPING
- Place the container on a flat steady surface.
- Place the cutting blade on the drive spindle and put them into the container. Or place the whisk attachment on the drive spindle and put them into container.
- Load the food items for chopping/whisking into the container.
Note: Never fill the container over the Max mark on scale.
- Place the container lid on top of the container, then place the motor unit.
- Insert the plug into power supply.
- Press the On button to start operation. The appliance will run as long as the button is kept pressed.
CAUTION: For most kinds of food, it is advisable to press the On/Off button momentarily a few times in succession and then to continue operating until the required degree of fineness has been achieved. Do not overload the appliance by putting in too much food and do not operate continuously for more than one minute.
PREPARING THE INGREDIENTS
To avoid damage of blade, do not process, crush or grid hard items such as frozen food, ice, cereals, rice, spices and coffee
Type of food| Preparation| Max amount at one time| Time
approximate
---|---|---|---
Parsley| Cut into 2 cm pieces| 50 g| 5 short bursts|
Onions| Peel and cut into 2-3 cm pieces| 350 g| 15 short bursts
Garlic| Peel| 200 g| 5 short bursts
Peanuts| Remove the shell| 150g| 5 sec.
Bread| Cut into 2 cm pieces| 100 g| 10 sec.
CLEANING AND MAINTENANCE
- Unplug the appliance from the power supply.
- Clean the container after each use.
- Wipe the motor outside with a damp cloth.
- Do not use aggressive and abrasive agents.
- After washing polish all pieces with dry cloth.
CAUTION: The blades are sharp and therefore dangerous. Handle with caution.
STORAGE
- Before storing, dry thoroughly the container, container lid, cutting blade.
- Store the appliance in a cool, dry place.
SPECIFICATION
Model| Power supply| Rating power| Max power| Net weight / Gross weight|
Package size (L х W х H)
---|---|---|---|---|---
MT-2072| 230 V ~ 50 Hz| 150 W| 500 W| 1,03 kg / 1,18 kg| 170 mm x 150 mm x 265
mm
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating,
rubber seals, etc.)
Production date is available in the serial number located on the
identification sticker on the gift box and/or on sticker on the device. The
serial number consists of 13 characters, the 4th and 5th characters indicate
the month, the 6th and 7th indicate the year of device production. Producer
may change the complete set, appearance, country of manufacture, warranty and
technical characteristics of the model without notice. Please check when
purchasing device.
Producer
Cosmos Far View International Limited
Room 701, 16 apt, Lane 165, Rainbow North Street , Ningbo, China
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>