ReWild with Felt Right Wall Tiles Instructions

ReWild with Felt Right Wall Tiles
Instructions

HOW TO INSTALL TILES

Thank you for your felt right order. We want to ensure you have the best possible installation experience.
Before beginning, please take a moment and watch our 3 minute installation video.

1. PEEL CORNER
   Peel one of the adhesive tabs from the branded liner.

2. PLACE AND PRESS
   Firmly press and rub the whole tab, including the edges, onto the back side of the tile. Place the tabs according to the Tab Placement. Ensure the adhesive tabs are firmly pressed and rubbed onto the tile to ensure proper adhesion.

3. REMOVE LINER
   Remove the backing, leaving the adhesive. If the adhesive removes with the tab as you lift, then press the corner again to re-attach the adhesive to the tile.

4. LINE UP AND PRESS
   Using your phone or a level, place the tile against the surface. Apply pressure against the tile for up to 30 seconds for the best results.

TAB PLACEMENT

HOW TO REMOVE TILES

1. PULL UP CORNER
   Starting with one corner, SLOWLY peel the tile from the wall, leaving the adhesive behind. Insert your finger behind the tile and slowly add pressure until the tile releases from one tab.

2. ROLL OFF ADHESIVE
   Starting at the corner, roll your thumb across the adhesive to peel it off the wall.

SCAN QR CODE
for 3-minute instructional video. https://feltright.com/pages/installation
If you have any questions email:
support@feltright.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>