neno Berkano Wireless Baby Monitor User Manual

neno Berkano Wireless Baby Monitor

Thank you for purchasing our product!
With the help of this device, you can monitor your child’s sleep or play in a different room.
This manual contains all the information necessary for the correct use of the device. Before using the baby monitor, we recommend that you insert and fully charge the battery in the monitor so that it will still work if you disconnect the AC power to move it to another room.
Please read the safety instructions before installing the devices.

WARNING! Leave the charging cable in a safe place (position) out of children’s reach. Failure to comply with the recommendation may threaten to strangle your child or cause other dangerous situations (e.g. electric shock) .

THE SET CONTAINS

1. Camera
2. Monitor
3. Power supply x2
4. User manual

WARNING: Only original chargers should be used. Do not connect directly to 220 I 230V power supply. Failure to follow the instructions may cause damage to the device or other dangerous situations .

DESCRIPTION OF THE CAMERA

• A. Temperature sensor
• B. Pairing button
• C. Power connector
• D. Loudspeaker
• E. Microphone
• F. Light sensor
• G. Camera lens
• H. Infrared LEDs
• I. Power LED

DESCRIPTION OF THE MONITOR

• A CD display
• B. Microphone
• C. Power/ Signal LED
• D. Volume + / Up key
• E. Voice transfer key
• F. Control key for lullaby playback
• G. Screen brightness down / left key
• H. Menu / OK key
• I. Screen brightness-up / right key
• Jl Function key (enable camera rotation)
• K Power / Back key
• L. Volume key -/ Down
• M. Loudspeaker
• N. Power connector

ICONS ON THE MONITOR DISPLAY

• A. Signal strength indicator
• B. Temperature in the child’s room
• C. Playing a lullaby
• D. Alarm activated
• E VOX mode active
• F. Camera rotation function activated
• G. Battery indicator
• H. PTT function activated
• I. Date and time

PRECAUTIONS

1. This device complies with all relevant electromagnetic field standards and is safe to operate when used in the manner described in the user manual. The full version of the declaration of conformity is available for download at the importer’s website: www.neno.pl. Always read the instructions in this manual carefully before using the device.
2. Adult assembly is required. Keep small parts out of the reach of children during assembly.
3. This product is not a toy. Do not allow children to play with the appliance.
4. The baby monitor is not a substitute for responsible adult supervision.
5. Do not place the monitoring unit and cables in the baby’s cot or within the reach of the baby (at least 1 meter).
6. If you are mounting on a cot, keep sufficient distance from the baby’s reach.
7. Keep the cables out of the reach of children.
8. Do not use the device near water or heat sources.
9. Use only the power adapters provided with the device.
10. Do not touch the contacts of the power socket with sharp or metal objects.

ATTENTION! The range of the device is influenced by external factors (e.g. walls, high voltage lines, other electrical devices), which means that the real range may be much lower than specified in the specification .

STARTING WORK WITH THE DEVICE

Camera power supply

1. Connect the small plug of the power adapter to the camera’s power connector and the other end to a 220V power outlet.
   NOTE: Use only the provided power adapter.

2. A steady blue LED indicates that the camera is working.

Monitor power supply

1. It is recommended to fully charge the battery of parent unit before first use.
   This will allow for uninterrupted operation of the device even in the event of a power failure.

2. The Charge LED will light up, which means the battery has started charging.

USING THE DEVICE

Preparation of the device
Place the monitoring unit in a convenient place (e.g. on a table) and point the camera lens towards the area you want to monitor. Adjust the camera until you are satisfied with the image displayed by the monitor.

NOTE: Do not place the monitoring unit within the reach of a child!
If the picture or sound is disturbed, move the units to different locations and make sure they are not close to other electrical appliances.

Camera pairing
The attached camera has already been paired at the factory, you do not need to re-register it with the receiver (LCD), unless it loses connection with the monitor. For details, see “Camera Registration”.

VOX button
Press the MENU button to enter the VOX mode.
In this mode, the screen automatically turns off to save power.
The screen automatically reactivates when it detects noise in the baby’s room.

Playing lullabies
Press the music playback control button to turn on the music player and play a lullaby through the built-in speaker of the camera.
Press the same button again to stop lullaby playback

Voice transmission function
Press and hold the PTT (microphone) button on the monitor device to talk to your baby through the camera’s speaker. The relevant symbol will appear at the bottom of the screen.

Volume control
During playback, press the DOWN button to decrease the volume or the UP button to increase the volume. The current volume level will be shown on the display for 5 seconds.

MENU OPTIONS

Main menu
Press the “OK” button to enter the main menu, which contains 6 items:

1. Camera
2. Alarm
3. Settings
4. VOX
5. Language
6. System information

Press the UP or DOWN button to move the cursor to select the desired option.
Then use the OK button to enter the sub-menu of the selected item.
Press the BACK button to return to the main screen.

Camera registration
Press the OK button to go to the Camera Registration screen, then press the pairing (connect) button on the back of the monitoring unit within 10 seconds.

Alarm
Press the OK button to enter Alarm option, then use the Up / Down buttons to change the hour. Press OK to confirm.

SETTINGS

1. Time and date
   This menu contains two items: – Set date / time – Set date / time format. Use the arrows to move the cursor and to change the value.

2. Temperature unit
   You can switch the unit to Celsius or Fahrenheit.

3. Reduce picture flicker
   You can adjust the image refresh mode (SO / 60Hz) to adjust the parameters of the display to eliminate image flickering.

4. Backlight of the LCD screen
   You can adjust the degree of illumination of the LCD screen.

5. Power LED
   The ability to turn on or off the LED diode in the camera.

BATTERY EXTRACTION

1. Disconnect from power.
2. Raise the stand
3. Slide your finger to remove the battery cover.
4. Pull out the battery.
5. Carefully pull the battery plug out of the port. Do not pull on the wires when removing the battery plug .

TECHNICAL SPECIFICATIONS

GENERAL:

• Frequency: 2.4 GHz D
• Working temperature: -10 to + 50 ° C
• Acceptable humidity: <85%
• Range: up to 260m (open space)

MONITOR:

• Screen: 3.2 “TFT LCD
• Video resolution: 320x240p
• Battery: Lithium Polymer 1150mAh
• Dimensions: 124 x 72 x 17mm
• Weight: 123g

CAMERA

• Illumination Minimum: 0 Lux (IR LED ON)
• Range in night mode: 5 meters
• Sensors: light/ temperature
• Dimensions: 116 x 72 x 66 mm
• Weight: 179g

WARRANTY I CLAIMS

The product is covered by a 24-month warranty. Warranty conditions available on the website: https://neno.pl/gwarancja
Details, contact and service address can be found at:
https://neno.pl/kontakt
Specifications and contents of the kit are subject to change without notice, we apologize for any inconvenience.

KGK Trade declares that this device Neno Berkano is compliant with significant requirements of directive 2014/53/EU.
The text of this declaration may be found on the website:
https://neno.pl/download/DOC/deklaracja-CE-Neno-Berkano.pdf

The crossed out trash can symbol indicates that unusable electrical or electronic devices, its accessories (such as power-supplies, cords) or components (for example batteries, if included) cannot be disposed of alongside with household waste. In order to dispose of the devices or its components (for example, batteries) deliver the device to the collection point, where it will be accepted free of charge. Disposal is subject to the recast version of the WEEE Directive (2012/19 / EU) and the Directive on batteries and accumulators (2006/66 / EC). Proper disposal of the device prevents degradation of the natural environment. Information about the collection points of the facilities is issued by the competent local authorities. Incorrect disposal of waste is subject to penalties provided for by the law in force in the given area.

Manufacturer:

• KGK Trade sp. z o.o. sp. k.
• Ujastek 5B
• 31-752 Cracow
• Poland
• Made in P.R.C.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>