rombica BT-S027, BT-S028, BT-S029 Bluetooth Speaker User Manual

USER MANUAL
Thank you for purchasing Rombica device.
Please read this user manual before operation and save it for the future
BLUETOOTH SPEAKER

GENERAL INFORMATION

1. Dynamic

2. Power/Mode button
   Short Press — switching modes
   Long press — power on/off

3. Back/Volume- button
   Short Press — play previous song
   Long press — decreasing volume

4. Play/Pause button
   Short Press — play/pause
   Long press — disconnect of Bluetooth connection (Bluetooth mode)
   Quick double press — call to last caller (Bluetooth mode)
   Short press during incoming call — receive incoming call (Bluetooth mode)
   Long press during incoming call — reject incoming call (Bluetooth mode)

5. Forward/Volume+ button
   Short Press — play next song
   Long press — increasing volume

6. Micro-USB port for charging built-in battery

7. microSD slot

8. AUX

9. LED indicator

SPECIFICATION

Power: DC 5V, from battery
Bluetooth version: v 5.0
True Wireless Stereo support: yes
Frequency range: 100 Hz — 18 kHz
Speaker power: 5 W
Speaker diameter: 40 mm
Passive radiator: built-in
Battery: 500 mAh /3.7V
Storage media devices support: microSD up to 32 GB
(MP3, WAV, WMA, APE, FLAC audio files)
Interfaces: microSD slot, micro-USB, AUX, BT, mic
In the box: speaker, USB cable, AUX cable, manual

OPERATION OF THE DEVICE

POWER ON
Press and hold power button. Sound notification and turned-on LED indicator will confirm power on
POWER OFF
Press and hold power button. Sound notification and turned-off LED indicator will confirm power off

PARING VIA BLUETOOTH

1. Turn on the speaker. Make sure that the speaker is in Bluetooth mode
2. Open Bluetooth settings on your smartphone/PC, enable Bluetooth and search for new devices. When Bluetooth speaker will be found, confirm paring
3. After successful pairing both the Bluetooth speaker and your device, you can control playback by Bluetooth speaker buttons

TRUE WIRELESS STEREO MODE
When you have two Rombica Mysound Onyx speakers you can use them together with True Wireless Stereo mode.

1. Turn on two Rombica Mysound Onyx speakers
2. Make sure that both speakers are in Bluetooth mode
3. Make sure that both speakers are not connected with your device via Bluetooth
4. Quick double press Forward / Volume+ button on one of the speakers to make TWS pairing. Sound notification will confirm TWS pairing
5. After successful TWS pairing you need to pair speakers with your Bluetooth device, same way as described in paragraph “Pairing via Bluetooth”

PHONE CALLS You could receive incoming calls with Bluetooth speaker if it paired to smartphone/tablet PC. You can talk using built-in mic and dynamic. Short press Play/Pause button to receive the incoming call. Press button again to end the call. Long press Play/Pause button is rejecting incoming call
MICROSD AUDIO PLAYBACK
Insert microSD card into slot (7). Bluetooth speaker will automatically switch to “microSD Audio Playback” mode. Use Bluetooth speaker buttons to control music playback
AUX PLAY Use (supplied) cable and connect it to the Bluetooth speaker by one side (AUX port) and the external device by another side. Be sure that cable is well connected. The Bluetooth speaker will automatically switch in AUX mode
BATTERY CHARGING Before use, fully charge Bluetooth speaker within 6 hours. New battery requires 2-3 full charge-discharge cycles to reach full capacity. Use (supplied) cable and conned it to the Bluetooth speaker by micro-USB side. Connect USB cable to the PC or wall charger (wall charger is not supplied). LED indicator is red while charging and turns green when the battery is fully charged

SAFETY INFORMATION

1. Before charging be sure that voltage of the power Is 5V. The recommended adapter is 5V I 800mA
2. If device is not used dining long time, charge it at least once per month
3. In cause of breaking do not try to open and repair device by yourself. Use service center
4. Avoid influence of the high humidity, dust and dirt. Use dry soft lint.free cloth to clean device. Not allowed to use washing or cleaning liquids
5. Do not store, use or charge device near heat sources and flammable objects, during low or high ambient temperature. Charing can be done only under adult supervision. Recommended temperature is 5 to 35 °C
6. Not allowed to drop or hit device
7. Do not insert foreign objects to the device interfaces
8. Turn off device after use
9. Never pull the cord to disconnect cable, pull the plug
10. Bluetooth speaker is not intended for the commercial use
11. Standard battery life is 500 charge-discharge cycles. After exceeding 500 cycles the effective capacity of the battery can be reduced. Effective capacity also depends on the ambient temperature
12. Do not cover working device by cloth or other material

STORAGE CONDITIONS

**** Keep the device in a dry, well-ventilated place, far from heaters and direct sunlight.
Keep the device out of reach of children. Do not bite or lick device, as it may cause damage or explode the device. Children or persons with disabilities should not use the
device without the supervision of the responsible person
Do not dispose with household waste! Required to dispose this electrical device at designated recycling collection point for electrical devices. It ensures that device is recycled professionally and prevents the release of the harmful substance into the environment. Make sure that device qa seis uncharged before disposal

mysound Onyx 1C BT-SO27
mysound Onyx 2C BT-SO28
mysound Onyx 3C BT-SO29

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>