NINGBO SA330 Glass Wireless Charger Instruction Manual
- June 5, 2024
- Ningbo
Table of Contents
NINGBO SA330 Glass Wireless Charger
DESCRIPTION
- Wireless Charging Pad
- Power Indicator
- Charging Input Port
- Wire less Charging Ind i cator
What’s included:
- 1 xWireless Charging Pad
- 1xUSB to the micro-USB charging cable
- 1 x instruction Manual
Tech Specifications
- Input power:DC 5V/2A
- Output power:5V/1A
- Product size:56.6 X H 9.5
- 60cm standrd black color Micro-USB cable
Instructions:
-
Use a certifed USB adapter, connect the
- a. provided Micro-USB cable to the USB adapter.
- b. Use a Micro-USB tip to connect to the input port on the charging pad.
-
Cha,glng mobile devices:
Check you, phone o, tablet suppo,tlng with wireless charging, it will be listed in the manufacturer’s specifications.- b. Simply place the enabled device atop the wl,eless cha,glng pad. You, device should show the cha,glng Indication.
- C. When completely charged, remove the device from the charging pad.
*Note: In order to charge devices, use only the
Note: In order to charge devices, use only the own device by the manufacturer.
SAFETY PRECAUTIONS:
- WARNING When using this product, bas,c precautions should always be followed, including the following:
- Read all the Instructions before using the product.
- To reduce the risk of Injury, close supervision, on is necessary when the product is used near children.
- Do not expose the device to moisture
- Do not use the device in excess ofits output rating. Overload outputs above ratingmay esult In a risk of fire or injury
- Do not use the device if damaged or modified
- Damagedormodifiedbatteriesmayex edlctable behavior resulting in fire, explosion or risk of Injury.
- a. Do not d; assemble the desk. Take ;t to a qualified serv;ce person when serv;ce or repa,r ;s requ red. Incorrect reassembly may result ;n a risk of fire or injury
- Do not e,pose the device to fire or excessive temperature.Exposure to fire or temperatures above 212吓may cause e,plosion.
- Haveservicingperformedbyaqualifiedrepair person using only identical replacement parts.
- This will ensure that the safety of the product is maintained
- DonotoverchargePhone.Unitmaygethot with excessive use.RemovePhonewhenitisfully charged. Neverchargeformore than 7 hours at a time
Wireless Charging Enabled Devices: iPhone 8/8Plus/X, Samsung Galaxy
S8/S8+/S7/S7 Edge/S6/S6 Edge, Nokia Lumia 1020/920/928, HTC 8X, HTC Droid DNA,
HTC Rzound, HTC Incredibly
4G LTE, Moto Droid Turbo, Motorola Moto 360 Smart Watch, Moto Droid Maxx,
Droid Mini, Google Nexus 6/4/5/7 (2013)。LG D1L, LG LTE2,
LG G2 (Verizon), Blackberry Z30 (Verizon)
Warning:
- Changes or modifications not e,pressly approved by the party responsible for
- compliance could void the user’ sauthorityto operate the equipment
FCC Rules.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for helpChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
a minimum distance 20cm between the radiator & body.
FCC ID:2AJZYSA330
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>