OPT7 Redline Tailgate Choice Installation Guide
- June 8, 2024
- OPT7
Table of Contents
OPT7 Redline Tailgate Choice
WHAT’S INCLUDED
Redline LED Bar X l
DIMENSION
INSTALLATION
STEP l
Test the Redline LED Bar for function before mounting on vehicle.
STEP 2
Remove tailgate from vehicle, if necessary.
STEP 3
Thoroughly clean the area where the Redline LED Bar will be mounted.
STEP 4
On the Redline LED Bar, peel the back off of the adhesive and apply firmly to
the cleaned area.
STEP 5
Plug the 4-pin flat connector into the proper receptacle on the vehicle.
STEP 6
Splice the red wire coming from the Redline LED Bar into the reverse signal
on the vehicle.
STEP 7
Optional: If hard-wiring, use image below to identify wire color functions and
pair them to appropriately identified wires on vehicle.
TO REDLINE LED BAR
TRAILER HARDWIRE HARNESS
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>