OPT7 AURA DreamColor Underglow LED Aluminum- Chasing Lighting Kit Installation Guide
- June 8, 2024
- OPT7
Table of Contents
OPT7 AURA DreamColor Underglow LED Aluminum- Chasing Lighting Kit
MAIN COMPONENTS
INSTALLATION
- Inspect the kit has all the contents included and power the unit to test the lights function properly with the 12 volt adapter provided.
- Decide where to locate the control box and ensure wiring has enough length for light bars to be installed in desired location.
IMPORTANT:
Avoid installation areas of the engine bay + heated surfaces.
As shown below, connect all the LED bars to the control box.
- L=13 cm w / DC 12V connector
- L=11 cm w / 3P-Female connector
- L=300 cm w / 3P-Male connector
- L=250 cm w / 3P-Female connector
- L=30 cm w / 3P-Male connector
- L=250 cm w / 3P-Female connector
- L=30 cm w / 3P-Male connector
- L=30 cm w / 3P-Male connector
- L=250 cm w / 3P-Female connector
- L=30 cm w / 3P-Male connector
- L=250 cm w / 3P-Female connector
HOW TO CONNECT POWER HARNESS TO YOUR VEHICLE
Connect the Red line(+) of power harness to the vehicle battery’s positive
terminal.
Connect the Black line (-) of power harness to the vehicle battery’s negative
terminal or an unpainted area on your vehicle’s frame.
WARNING
- Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10AMPs or less!!
- Please ensure that the LED bars or strips/control box/wiring all are mounted in areas where will not exceed 85℃ or 185℉.
- Secure Control box in desired location with Velcro or zipties.
- Secure the light bars using the zip ties to tie all the wiring away from the moving components.
Using the included E-Z Remote, select your desired color or pattern.
- Power-ON
- Automatic Color Change
- Power-OFF
- Speed +/- 10Levels
- Mode +/- 20 Mode
- Dimmer 10 Levels Color
- Selection 12 Colors
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by OPT7
Lighting will void product warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>