rombica NEO PRO-330C Power Bank User Manual
- June 8, 2024
- rombica
Table of Contents
rombica NEO PRO-330C Power Bank
Thank you for purchasing Rombica device. Please read this user manual before the operation and save it for the future
GENERAL INFORMATION
- Power
- LED display
- DC IN, input to charge device
- Type-C port. Power Delivery 3.0 support
- USB output. Quick Charge 3.0 support.
- USB output
- DC OUT, output to charge laptop and other compatible devices
SPECIFICATION
IN THE
BOX
**Note:**
- outside diameter
- inside diameter
HOW TO CHARGE POWER BANK FROM DC INPUT
-
Unplug all connected devices from the power bank.
-
Connect supplied wall charger © to the power bank (input Nil 3), and after that to the 110-220V electric socket
-
You can check capacity status on the LED display. Once you see 100 on the LED display – charging completed.
-
Unplug wall charger from the power bank
HOW TO CHARGE POWER BANK FROM TYPE-C INPUT
-
Unplug all connected devices from the power bank
-
Connect wall charger electric socket++ Type-C (not supplied) to the power bank (input N° 4), and after that to the electric socket.
Wall charger should support Power Delivery protocol (20V, 4th or 5th profile) -
You can ctleck capacity status on the LED display. Once you see 100 on the LED display – charging completed
-
Unplug wall charger from ttle power bank
ON / OFF
To turn on power bank press shortly the power button N’1. LED display will
tum on. Power Bank turns off automatically without load
CHARING EXTERNAL DEVICES FROM USB PORTS
- Turn on the Power Bank
- Connect external device to USB port of power bank (outputs N°5 – 6)
- Disconnect external device from the power bank after using
CHARGING EXTERNAL DEVICES FROM TYPE-C PORT
- Turn on the Power Bank
- Connect an external device to the Type-C port of the power bank (port N°4). Max Power of Type-C output is GOW. If your device, for example, laptop requires a charger with higher power output – do not charge it with the power bank. It can lead to the power bank overheating
- Disconnect an external device from the power bank after using
CHARGING LAPTOPS AND COMPATIBLE DEVICES FROM DC OUT PORT. DC OUT MODE
- Disconnect all cables from USB Type-A and USB Type-C ports.
- If you are going to charge Apple MacBook with MagSafe 1 or MagSafe 2. then connect cable @ar@to the DC OUT (port N°7). If you are going to charge laptops or other devices compatible with the supplied adapters and voltage range supported by the power bank – then connect cable ® to the port N°7
- Turn on the power bank
- Long press of the power button will switch power bank to OUT mode. LED display will show current
- Connect cable (2J with installed compatible adapter® – I@ / MagSafe cable to the laptop input
- Disconnect power bank from the laptop after usage. Long press of the power button will exit DC OUT mode.
NOTE: lf you enter DC OUT mode, but not going to use DC OUT port, then press and hold power button again to exit DC OT mode. It is forbidden to connect additional devices to the power bank while DC OUT mode is active.
Notes:
- If input voltage on your laptop is equal to 16.SV, then you can use mode “16V” only when the remaining capacity of laptop battery ls at least 20%
- If Input voltage on your laptop ls equal to 19.5V, then you can use mode •19v” only when the remaining capacity of laptop battery is at least 20%
- Any other voltage difference between power bank output and laptop input is forbidden
- Do not connect a laptop to the power bank before right voltage chosen
- Max power of DC OUT is 70W. When the original wall charger of your laptop is more powerful – you can charge charge your laptop if one of two conditions are satisfied.
- laptop Is turned off
- Laptop is turned on, but •battery saver” mode enabled, and discrete graphics card disabled (if available) and screen brightness reduced
QUICK CHARGE AND POWER DELIVERY
USB output (port N°5) support Quick Charge 3.0. After connecting QC 3.0
compatible device, USB port will work in fast mode automatically, and you do
not need to change the voltage manually
Type-C port support Power Delivery. After connecting PD compatible device,
Type-C port will work in fast mode au1omatlcally, and you do not need to
change the voltage manually
REMAIN CAPACITY
Tum on power bank to check remaining battery capacity. While power bank Is
turned on – LEO display shows remaining capacity
STORAGE CONDITIONS
Keep the power bank in a dry, well-ventilated place, far from heaters and direct sunlight. Keep the power bank out of the reach of children. Do not bite or lick the power bank, as it may cause damage to the power bank. Children or persons with disabilities should not use the power bank without the supervision of the responsible person Do not dispose with household waste! Required to dispose this electrical device at designated recycling collection point for electrical devices. It ensures that device is recycled professionally and prevents the release of the harmful substance into the environment. Make sure that device is uncharged before disposal
SAFETY INFORMATION
-
Read this manual fully and thoroughly before first use
-
ln case of breaking do not try to open and repair device by yourself. Use the service center.
-
Avoid influence of the high humidity, dust, and dirt. Use a dry soft lint-free cloth to clean the power bank.
Not allowed to use washing or cleaning liquids. -
Do not store or use the power bank near heat sources and flammable objects, during low or high ambient temperature. Charing can be done only under adult supervision. Recommended temperature is 5 to 35 c
-
Never pull the cord to disconnect the cable. pull the plug
-
Not allowed to drop or hit the power bank
-
Disconnect all external devices from the power bank after usage
-
Do not insert foreign objects into the power bank interfaces
-
Do not cover working power bank with cloth or other material
-
Before first use, fully charge power bank within 20 hours.
-
Before charging power bank be sure that you use a wall charger with right voltage
-
Before laptop charging be sure that you select proper voltage mode
TECHNICAL CHARACTERISTICS AND APPEARANCE MAY BE CHANGED WITHOUT PRIOR NOTICE