OPT7 Aura PRO Bluetooth 4pc LED Lighting Kit Installation Guide
- June 8, 2024
- OPT7
Table of Contents
QUANTUM ROCK LIGHTS
BLUETOOTH
INSTALLATION GUIDE
COMPONENTS
WHERE TO INSTALL
RECOMMENDED LOCATIONS FOR ROCK LIGHT PODS
INSTALLATION STEPS
TOOLS REQUIRED
- 5/32-inch Drill Bit
- 7/64-inch Drill Bit
- Phillips Head Screwdriver
-
Designate your mounting locations for each Rock Light Pod and the control box. (Refer to page 4 for recommended mounting locations) Avoid hot surfaces and/or moving parts.
-
Use a pen to mark the holes where you want to mount the Rock Light Pods. Then, drill a 5/32” hole(s) for the wire connector to pass through.
-
Drill a 7/64” hole for each marked hole.
-
Secure the Rock Light Pods using the included screws. (If mounting on a rounded or uneven surface, utilize the optional rubber mounting pads.)
Caution: Rock Light Pods become extremely hot during use – keep away from any vehicle parts that may be damaged by exposure to high temperatures. -
Connect all Rock Light Pod wires to the control box connectors. Secure by twisting.
-
Connect the red positive line from the control box either directly to the vehicle battery or by using an open fuse tap.
-
Ground the negative wire from the control box by connecting it to an unpainted area on your vehicle’s frame.
Optional: If you would like for the door assist function to be used, it is recommended to connect the door assist wire from the control box to a positive (+) light source that is turned on when the door is open or to the dome light. This will activate the Rock Lights to be ON when the door is turned on. -
Open the OPT7 CONNECT, pair your smart device to the control box, and pick your desired color!
http://qr.w69b.com/g/pa9DknB6g
OPT7 CONNECT APP
QR CODE TO DOWNLOAD
- Colors
- Modes
- Door Assist
- Support
- Ability to control up to 4
- devices at once
http://qr.w69b.com/g/msHWWYMoM
SPECIFICATIONS
Wattage ………….. 8W Per Pod
Amp Draw ………….. 8A
8 LEDs …………… Quad-Core CREE
Brightness …………….. 1,600 Lumens Per Pod
Voltage ………………… 12V
Resistance …………….. IP68 Water-Resistant (Pod Only)
Operating Temperature ……………….. -20°-150°F
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation. If
you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by OPT7
Lighting will void product warranty.
Follow us on Instagram @opt7lighting
Subcribe to our YouTube channel. Opt7Lighting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>