rombica BT-S018 Mysound Drive Bluetooth Speaker User Manual
- June 8, 2024
- rombica
Table of Contents
rombica BT-S018 Mysound Drive Bluetooth Speaker
Thank you for purchasing Rombica device. Please read this user manual before the operation and save it for the future
GENERAL INFORMATION
-
Stereo dynamics
-
Treble knob Clockwise rotation – increase treble Counterclockwise rotation – decrease treble
-
Bass knob Clockwise rotation – increase bass Counterclockwise rotation – decrease bass
-
Volume knob Clockwise rotation – increase volume
Counterclockwise rotation – decrease volume -
USB Type-A port for Flash Drive
-
AUX input
-
LED indicator#l
-
LED indicator#2
-
LED indicator#3
-
Backward button Press – play previous song (USB/Bluetooth mode)
-
.Play/Pause button Short press – play/pause (USB/Bluetooth mode) Long press – refresh the Bluetooth connection
-
Forward button Press – play next song (USB/Bluetooth mode)
-
Power switc
-
Bass port
-
DC input for charging built-in battery
SPECIFICATION
Power: built-in battery, AC adapter: I00-240V, 50-60 Hz/ 12V, IA
Audio channels : 2.0
Bluetooth version: v4.0
Speakers power : 30W (2 x I OW+ 2 x 5W)
Speakers: Midrange & bass 89 mm 2 x lOW, tweeter 38 mm 2 x 5W
Passive radiator: Bass port
Frequency range : 80 Hz – 20 kHz S/N Ratio: n5dB
Battery: 3 x 2000 mAh (22.2 Wh)
Amplifler: TPl3118 16 bit DSP (Texas Instruments)
External media support: USB Flash Drive up to 32 GB (MP3, WAV)
Interfaces: DC-IN, USB Type-A, AUX, Bluetooth In the box: speaker, AC
adapter, AUX cable, manual
OPERATION OF THE DEVICE
POWER ON
Switch the Power switch (13) to ‘On’ position. Turned-on LED indicator #2 will
confirm power on
POWER OFF
Switch the Power switch (13J to ‘Off’ position. Turned-off LED indicator#2
will confirm power off
PARING VIA BLUETOOTH
-
Disconnect AUX cable if connected. Turn on the speaker. The speaker will automatically switch
in Bluetooth mode. LED indicator#! blinks blue while pairing -
Open Bluetooth settings on your smartphone/PC, enable Bluetooth and search for new devices. When Bluetooth speaker will be found, confirm paring. LED indicator is blue when pairing is successful
-
After successful pairing both the Bluetooth speaker and your device, you can contrcl playback by
Bluetooth speaker buttons
AUX PLAY
Use (supplied) cable and connect it to the Bluetooth speaker by one side (AUX input) and the external device by another side. Be sure that cable is well connected. The Bluetooth speaker will automatically switch in AUX mode
USB FLASH DRIVE AUDIO PLAYBACK
Insert USB Flash Drive into the port USB Type-A (5). Bluetooth speaker will automatically switch to ‘LJSB Flash drive audio playback’ mode. Use Bluetooth speaker buttons to control music playback
SOUND CONTROL
You can control Treble and Bass. Turn knob (2) and (3) clockwise to increase Treble/Bass and counterclockwise to decrease Treble/Bass
BATTERY CHARGING
Before use, fully charge Bluetooth speaker within 12 hours. New battery requires 2-3 full charge-discharge cycles to reach full capacity. Plug AC adapter (supplied) into power socket (I 00-240V) and connect it to the Bluetooth Speaker by DC IN side. LED indicator#3 is red while charging and becomes green when the battery is fully charged.
STORAGE CONDITIONS
Keep the device in a dry, well-ventilated place, far from heaters and direct sunlight. Keep the device out of reach of children. Do not bite or lick the device, as it may cause damage or explode the device. Children or persons with disabilities should not use the device without supervision of the responsible person.
SAFETY INFORMATION
-
Before charging be sure that voltage of the power is 12V. It’s strictly recommended to use provided power adapter. Be sure that DC power is 100-240V before connecting the power adapter
-
If device is not used during long time, charge it at least once per month
-
In cause of breaking do not try to open and repair device by yourself. Use service center
-
Avoid influence of the high humidity, dust and dirt. Use dry soft lint-free cloth to clean device. Not allowed to use washing or cleaning liquids
-
Do not store, use or charge device near heat sources and flammable objects, during low or high
ambient temperature. Charing can be done only under adult supervision. Recommended temperature is 5 to 35 °C -
Not allowed to drop or hit device
-
Do not insert foreign objects to the device interfaces
-
Turn off device after use
-
Never pull the cord to disconnect cable, pull the plug
-
Bluetooth speaker is not intended for the commercial use
-
Standard battery life is 500 charge-discharge cycles. After exceeding 500 cycles the effective capacity of the battery can be reduced. Effective capacity also depends on the ambient temperature
-
Do not cover working device by cloth or other material
Do not dispose with household waste! Required to dispose this electrical device at designated recycling collection point for electrical devices. It ensures that device is recycled professionally and prevents the release of the harmful substance Into the environment. Make sure that device Is uncharged before disposal.