rombica BT-S116 mysound Mia Bluetooth Speaker User Manual

BLUETOOTH SPEAKER
mysound Mia
ID: BT-S116
User Manual

BT-S116 mysound Mia Bluetooth Speaker

Thank you for purchasing Rombica device. Please read this user manual before the operation and save it for the future.

SPECIFICATION

Power: DC 5V, from battery
Bluetooth version: 5.0
Frequency range:100 Hz — 20 kHz
Speaker power: 6 W (2 x 3 W)
Speaker diameter: 40 mm
Battery: 1200 mAh / 3.7 V
Storage media devices support: microSD / USB Flash Drive up to 32 GB (MP3, WAV audio files)
FM Radio: yes
Interfaces: microSD slot, micro-USB, USB Type-A, AUX, BT, mic
In the box: speaker, USB cable, AUX cable, manual

GENERAL INFORMATION

1. Mode button Short Press — switching modes
   • Bluetooth
   • AUX Play (available only when AUX cable is installed)
   • USB Flash Drive audio playback (available only when USB Flash Drive is installed)
   • microSD audio playback (available only when microSD card is installed)
   • FM You can hear unique sound notification for each mode:
   • Bluetooth — single «beep» sound
   • AUX Play — double «beep» sound
   • USB Flash Drive audio playback — triple «beep» sound
   • microSD audio playback — quadruple «beep» sound
   • FM — quintuple «beep» sound

2. Play / Pause button
   Short Press — play/pause
   Short press during incoming call — receive incoming call (Bluetooth mode) Long press during incoming call — reject incoming call (Bluetooth mode)

3. LED indicator

4. BackNolume- button
   Short Press — play previous song
   (FM mode: select previous radio station) Long press — decreasing volume

5. ForwardNolume+ button Short Press — play next song (FM mode: select next radio station) Long press — increasing volume

6. AUX

7. USB Type-A for connecting USB Flash Drive

8. MicroSD slot

9. Micro-USB port for charging built-in battery

10. Power on / Power off switch

OPERATION OF THE DEVICE

Power ON
Switch Power on / Power off switch (10) to the right side. Sound notification and turned-on LED indicator will confirm power on.
Power OFF
Switch Power on / Power off switch (10) to the left side. Sound notification and turned-off LED indicator will confirm power off.

Pairing via Bluetooth

1. Turn on the speaker. Make sure that the speaker is in Bluetooth mode.
2. Open Bluetooth settings on your smartphone/PC, enable Bluetooth and search for new devices. When Bluetooth speaker will be found, confirm pairing.
3. After successful pairing both the Bluetooth speaker and your device, you can control playback by Bluetooth speaker buttons.

Phone calls
You could receive incoming calls with Bluetooth speaker if it paired to smartphone/tablet PC. You can talk using built-in mic and dynamics. Short press Play/Pause button to receive the incoming call. Press button again to end the call. Long press Play/Pause button is rejecting incoming call. Quick double press Play/Pause button for call back to last caller.
FM radio
Switch the working mode to FM Radio mode. Long press Play/Pause button to start searching available radio stations. Wait for the search to complete. To change radio stations use buttons (4) and (5).
MicroSD audio playback
Insert microSD card into slot (8). Bluetooth speaker will automatically switch to microSD Audio Playback mode. If microSD card is inserted already, you could use Mode button to select mode «microSD card audio playback». Use Bluetooth speaker buttons to control music playback.
USB flash drive audio playback
Insert USB Flash drive into the slot USB Type-A (7). Bluetooth speaker will automatically switch to «USB Flash drive audio playback» mode. If USB Flash drive is inserted already, you could use Mode button to select mode «USB Flash drive audio playback». Use Bluetooth speaker buttons to control music playback.
AUX play
Use (supplied) cable and connect it to the Bluetooth speaker by one side (AUX port) and the external device by another side. Be sure that cable is well connected. The Bluetooth speaker will automatically switch in AUX mode. If AUX cable is connected already, you could use Mode button to select mode «AUX Play».
Battery charging
Before use, fully charge Bluetooth speaker within 6 hours. New battery requires 2-3 full charge-discharge cycles to reach full capacity. Use (supplied) cable and connect it to the Bluetooth speaker by micro-USB side. Connect USB cable to the PC or wall charger (wall charger is not supplied). LED indicator is red while charging and turns blue when the battery is fully charged.

SAFETY INFORMATION

1. Before charging be sure that voltage of the power is 5V. The recommended adapter is 5V / 0.5A.
2. If device is not used during long time, charge it at least once per month.
3. In cause of breaking do not try to open and repair device by yourself. Use service center.
4. Avoid influence of the high humidity, dust and dirt. Use dry soft lint-free cloth to clean device. Not allowed to use washing or cleaning liquids.
5. Do not store, use or charge device near heat sources and flammable objects, during low or high ambient temperature. Charging can be done only under adult supervision. Recommended temperature is 5 to 35 °C.
6. Not allowed to drop or hit device.
7. Do not insert foreign objects to the device interfaces.
8. Turn off device after use.
9. Never pull the cord to disconnect cable, pull the plug.
10. Bluetooth speaker is not intended for the commercial use.
11. Standard battery life is 500 charge-discharge cycles. After exceeding 500 cycles the effective capacity of the battery can be reduced. Effective capacity also depends on the ambient temperature.
12. Do not cover working device by cloth or other material.

STORAGE CONDITIONS
Keep the device in a dry, well-ventilated place, far from heaters and direct sunlight. Keep the device out of reach of children. Do not bite or lick the device, as it may cause damage or explode the device. Children or persons with disabilities should not use the device without supervision of the responsible person.
TECHNICAL CHARACTERISTICS AND APPEARANCE MAY BE CHANGED WITHOUT PRIOR NOTICE
Do not dispose with household waste! Required to dispose this electrical device at designated recycling collection point for electrical devices. It ensures that device is recycled professionally and prevents the release of the harmful substance into the environment. Make sure that device is uncharged before disposal.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>