rombica ALF-00080 Series Power Bank User Manual

rombica ALF-00080 Series Power Bank

GENERAL INFORMATION

SPECIFICATION

• Battery type: Li-ion
• Capacity: 8 000 mAh / 29.6 Wh
• Input: micro-USS 5V / 2A
• Output: USB 5V / 2A
• Dimensions: 63.5 x 22.5 x 95 mm
• Weight: 190+10g

OPERATION OF THE DEVICE

POWER ON
Connect your device to the power bank. It will automatically turn on *

POWER OFF
Power bank will turn off automatically without the use

• Connected device should load power bank. If this does not happen (for example, connected device deeply discharged) power bank will not turn on. Also you can press the power button to turn on the power bank

TECHNICAL CHARACTERISTICS AND APPEARANCE MAY BE CHANGED WITHOUT PRIOR NOTICE

REMAINING BATTERY CAPACITY

Press the power button to check remaining battery capacity. While power bank is on – LED indicator shows remaining capacity:

LED light

| Remaining capacity
---|---
Lit in white|

66%

Lit in blue

| >33%
Lit in red|

5%

HOW TO CHARGE POWER BANK

Use (supplied) USB cable and connect it to the power bank’s micro-USS input. USB Type-A cable’s side connects to the PC or wall charger (wall charger is not supplied). The LED indicator flashes while charging and stops flashing when the battery fully charged (white light)

HOW TO CHARGE DEVICES

1. You can use original device’s USB cable or supplied cable for charging
2. Connect USB cable to the power bank’s USB output by one side and the personal device by another side
3. Disconnect USB cable from power bank after use

STORAGE CONDITIONS

Keep the device in a dry, well-ventilated place, far from heaters and direct sunlight.
Keep the device out of reach of children.
Do not bite or lick device, as it may cause damage or explode the device. Children or persons with disabilities should not use the device without the supervision of the responsible person

Do not dispose with household waste! Required to dispose this electrical device at designated recycling collection A point for electrical devices. It ensures that device is recycled professionally and prevents the release of the harmful substance into the environment. Make sure that device is uncharged before disposal

SAFETY INFORMATION

1. Before use, fully charge power bank within 11 hours. New battery requires 2-3 full charge-discharge cycles to reach full capacity

2. Before charging power bank be sure that voltage of the power is 5V. The recommended adapter is 5V / 2000mA

3. If device is not used during long time, charge it at least once per month

4. Standard battery life is 500 charge-discharge cycles. After exceeding 500 cycles the effective capacity of the battery can be reduced. Effective capacity also depends on the ambient temperature

5. Never pull the cord to disconnect cable, pull the plug

6. Do not store, use or charge device near heat sources and flammable objects, during low or high ambient temperature. Charing can be done only under adult supervision. Recommended temperature is 5 to 35 °C

7. Not allowed to drop or hit device

8. Do not try to open and repair broken device by yourself. Use service center

9. Avoid influence of the high humidity, dust and dirt. Use dry soft lint-free cloth to clean device.
   Not allowed to use washing or cleaning liquids

10. Do not insert foreign objects to the device interfaces

11. Do not cover working device by cloth or other material

IN THE BOX

1. Power Bank
2. USB cable

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>