LUMASCAPE L3 LS9030 Light User Guide
- June 8, 2024
- LUMASCAPE
Table of Contents
L3 LS9030 Light
User Guide
LINEALUX L3 LS9030
| MODEL | LS9030 |
|---|---|
| PART NUMBER | LS9030 – xxx xxx xx xx x x 01 xx xx xxx |
LS9030 – xxx xxx xx xx x x 09 xx xx xxx
INSTALLATION TYPE| LINEAR FACADE
IP RATING| IP66/67 (Passes IP68 Test)
SUPPLY VOLTAGE| 220-240 -Vac, 50 Hz 120/277 -Vac, 60 Hz
INSTRUCTIONS COVER| POWERSYNC
DIMENSIONS (LxWxH)| As per included drawings
WEIGHT| 6.2 lbs (2.8 kg) for 4 ft section
MAX. PROJECTED AREA| 0.6 ft2 (0.05 m2) for 4 ft section
Tools Required
Included Components
| Do Not Use Power Tools on Screws| | Do Not Hose or Pressure Clean
---|---|---|---
| Keep Electronics Free From Dirt and Moisture| | Do Not Use Silicone On
Outside Surface
| Keep Away from Flammable Materials| | Do Not Cut Cable to the Luminaire
Please read and follow all safety instructions carefully. Failure to do so
will void warranty.
WARNING – Product Warranty is void if product is not installed as per
installation instructions and in compliance with all local and provincial
codes.
- Ensure installation complies with local electrical rules and regulations.
- All electrical work must be performed by a licensed electrician.
- Protective earth; protective ground (symbol 7).
- All luminaires may become hot. Use discretion on where the luminaire is mounted. Take care when setting luminaire as it may become hot.
- Luminaire should only be used complete with protective shield. If protective shield is cracked, immediately stop using luminaire. Isolate light source, keep it dry and immediately contact Lumascape for replacement of protective shield (symbol 10).
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by Lumascape or their service agent in order to avoid a hazard.
- The light source contained in this luminaire shall only be replaced Lumascape or their service agent.
- Do not stare at the operating light source. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 46‘ (14 m) is not expected (symbol 13)
- Basic insulation has been maintained between line voltage and the control conductors.
- To reduce the risk of strangulation, the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.
- Ensure mains input power is surge protected.
- Never make or break connections while the circuit is energized.
- Do not make modifications or alter the product.
- Keep luminaire clean and free of debris.
- Only clean with warm water.
- Do not use chemicals or abrasives to clean luminaire as this may void the product warranty.
- Connections are to be kept clean and dry at all times.
- Suitable for use indoors or outdoors.
Assembly Instructions
Wiring Designations
PowerSync (4-Core) –International
| Designation | Color |
|---|---|
| Active | Brown |
| Neutral | Blue |
| Earth | Green / Yellow |
| Data | Black |
Do not Hi-Pot test
Dimensions
Luminaire Rotation
Asymmetric Optics
Find more product resources at lumascape.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>