rombica BT-S031 Bluetooth Speaker User Manual

June 9, 2024
rombica

BLUETOOTH SPEAKER
mysound Orion ID: BT-S031
USER MANUAL

Thank you for purchasing Rombica device. Please read this user manual before the operation and save it for the future

GENERAL INFORMATION

  1. Stereo dynamics

  2. Power button Long press
    – power on/off 3. Mode button Short Press
    – select mode:
    – Bluetooth
    – microSD audio playback (available only when microSD card is installed)
    – AUX (available only if there is AUX connection) You can hear different sound notification for each mode:
    – Bluetooth – single “beep” sound
    – microSD audio playback – double “beep” sound
    – AUX – triple “beep” sound

  3. Play/Pause button Short Press – play/pause Quick double press – call to last caller (Bluetooth mode) Short press during incoming call – receive incoming call (Bluetooth mode) Long press during incoming call – reject incoming call (Bluetooth mode)

  4. Backward/Volume- button
    Short Press – play previous song
    Long press – decreasing volume

  5. Forward/Volume+ button
    Short Press – play next song
    Long press – increasing volume

  6. Mic

  7. LED indicator #1

  8. microSD slot

  9. AUX

  10. Micro-USB port for charging built-in battery

  11. LED indicator #2

SPECIFICATION

Power: DC 5V, from battery
Bluetooth version: v5.0
Frequency range: 40 Hz – 15 kHz
Speaker power 20 W (2 x 10 1N)
Speaker diameter 58 mm
Passive radiator built-in, 2 pcs
Battery: 4000 mAh / 3.7 V
Storage media devices support: microSD up to 32 GB (MP3, WAV, WMA, APE, FLAC audio files)
Interfaces: microSD slot, micro-USB, AUX, BT, mic
In the box: speaker, USB cable, AUX cable, manual

OPERATION OF THE DEVICE

POWER ON
Press and hold Power button. Sound notification will confirm power on
POWER OFF
Press and hold Power button. Sound notification will confirm power off

rombica BT S031 Bluetooth Speaker-

TECHNICAL CHARACTERISTICS AND APPEARANCE MAY BE CHANGED WITHOUT PRIOR NOTICE

 PARING VIA BLUETOOTH

  1. Turn on the speaker. Make sure that the speaker is in Bluetooth mode
  2. Open Bluetooth settings on your smartphone/PC, enable Bluetooth and search for new devices. When Bluetooth speaker will be found, confirm paring
  3. After successful pairing both the Bluetooth speaker and your device, you can control playback by Bluetooth speaker buttons

PHONE CALLS
You could receive incoming calls with Bluetooth speaker if it paired to smartphone/tablet PC. You can talk using built-in mic and dynamic. Short press Play/Pause button to receive the incoming call. Press button again to end the call. Long press Play/Pause button is rejecting incoming call
MICROSD AUDIO PLAYBACK
Insert microSD card into slot (9). Bluetooth speaker will automatically switch to “microSD Audio Playback” mode. Use Bluetooth speaker buttons to control music playback
AUX PLAY Use (supplied) cable and connect it to the Bluetooth speaker by one side (AUX port) and the external device by another side. Be sure that cable is well connected. The Bluetooth speaker will automatically switch in AUX mode
BATTERY CHARGING
Before use, fully charge Bluetooth speaker within 8 hours. New battery requires 2-3 full charge-discharge cycles to reach full capacity. Use (supplied) cable and connect it to the Bluetooth speaker by micro-USB side. Connect USB cable to the PC or wall charger (wall charger is not supplied). LED indicator is red while charging and turns off when the battery is fully charged
STORAGE CONDITIONS
Keep the device in a dry, well-ventilated place, far from heaters and direct sunlight. Keep the device out of reach of children. Do not bite or lick the device, as it may cause damage or explode the device. Children or persons with disabilities should not use the device without supervision of the responsible person

SAFETY INFORMATION

  1. Before charging be sure that voltage of the power is 5V. The recommended adapter is 5V / 1000mA
  2. If device is not used during long time, charge it at least once per month
  3. In cause of breaking do not try to open and repair device by yourself. Use service center
  4. Avoid influence of the high humidity, dust and dirt. Use dry soft lint-free cloth to clean device. Not allowed to use washing or cleaning liquids
  5. Do not store, use or charge device near heat sources and flammable objects, during low or high ambient temperature. Charing can be done only under adult supervision. Recommended temperature is 5 to 35 °C
  6. Not allowed to drop or hit device
  7. Do not insert foreign objects to the device interfaces
  8. Turn off device after use
  9. Never pull the cord to disconnect cable, pull the plug
  10. Bluetooth speaker is not intended for the commercial use
  11. Standard battery life is 500 charge-discharge cycles. After exceeding 500 cycles the effective capacity of the battery can be reduced. Effective capacity also depends on the ambient temperature
  12. Do not cover working device by cloth or other material

Do not dispose with household waste! Required to dispose this electrical device at designated recycling collection point for electrical devices.
**** It ensures that device Is recycled professionally and prevents the release of the harmful substance into the environment. Make sure that device is uncharged before disposal

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals