rombica 1304350 Wireless Charger User Manual
- June 9, 2024
- rombica
Table of Contents
1304350 Wireless Charger
User Manual
Thank you for purchasing Rombica device. Please read this user manual before the operation and save it for the future.
GENERAL INFORMATION
| 1.Wireless Charging Surfaces | 3.LED indicator #1 |
|---|---|
| 2.DC input | 4.LED indicator #2 |
TECHNICAL CHARACTERISTICS AND APPEARANCE MAY BE CHANGED WITHOUT PRIOR NOTICE
SPECIFICATION
INPUT: DC 12V/2.5A
ADAPTER: 100-240V, 50-60Hz / 12V, 2.5A
OUTPUT: 2 x 5V/1A; 5V/1.5A (7.5W); 9V/1.1A (10W)
MAX OUTPUT: 20W
IN THE BOX: power adapter, user manual
FAST CHARGE: support 7.5W and 10W
Wireless charging distance: up to 5 mm
Work with Qi-compatible devices
This wireless charging pad was produced according to the Qi standard. Please
use it with Qi-friendly phones. If your phone is not Qi-compatible, you should
use Qi-receiver (not included)
OPERATION OF THE DEVICE
-
Place the wireless charger on a flat surface
-
Use (supplied) power adapter and connect the wireless charger to a wall socket. LED indicators will quickly turn on and then turn off
-
Place your device (for example, smartphone with Qi receiver) at the center of one of the Wireless Charging Surfaces (1). If you want to charge two devices at the same time – put one of devices at the center of one of the Wireless Charging Surfaces, and second device – at the center of another of the Wireless Charging Surfaces.
When you put device on Wireless Charring Surface – LED indicator, that match with wireless charging area lites white*
Qi-receiver in your device should be precisely at the center of one of wireless charging areas -
Once your device is charged entirely, pull off it from the wireless charger
-
Disconnect the wireless charger from wall socket
- If LED is blinking or not white, please check that your device support Qi. Also be sure there are no foreign objects between your device and the wireless charger and recheck position of it
SAFETY INFORMATION
- Before use be sure that voltage of wall socket is 100-240V.
- It is highly recommended to use supplied power adapter.
- In case of breaking do not try to open and repair device by Use service center.
- Avoid influence of the high humidity, dust and dirt. Use dry soft lint-free cloth to clean device. Not allowed to use washing or cleaning liquids.
- Do not store, use device near heat sources and flammable objects, during low or high ambient temperature. Charing can be done only under adult supervision. Recommended temperature is 5 to 35 °C.
- Never pull the cord to disconnect the cable, pull the plug.
- Not allowed to drop or hit device.
- Disconnect the wireless charger from the wall socket after use.
- Do not insert foreign objects into the device interfaces.
- Do not cover working device with cloth or other material.
- Do not try to charge your device with the wireless charger, if your device doesn’t support Qi protocol.
- Magnetic fields from the wireless charger can damage bank cards. To avoid damage do not keep your bank card near working wireless charger.
- If you are using external Qi-receiver (adapter allowed to charge an non-Qi device to be charged by wireless charger), please connect it to your device at first. Do not place Qi-receiver on the working wireless charger separately from your device.
- Take a break from using if the wireless charge overheats.
- The wireless charge can affect wireless networks with low-level signal.
- Do not place on the working wireless charger device with connected USB cable. Disconnect all cables from your device before charging it with the wireless charger.
- If your device covered by thick case, wireless charge might do not work.
STORAGE CONDITIONS
Keep the device in a dry, well-ventilated place, far from heaters and direct sunlight. Keep the device out of reach of children. Do not bite or lick the device, as it may cause damage or explode the device. Children or persons with disabilities should not use the device without supervision of the responsible person.
Do not dispose with household waste! Required to dispose this electrical device at designated recycling collection point for electrical devices. It ensures that device is recycled professionally and prevents the release of the harmful substance into the environment. Make sure that device is uncharged before disposal.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>