rombica NQ-00210 Wireless Charger User Manual
- June 9, 2024
- rombica
Table of Contents
NQ-00210 Wireless Charger
User Manual
NQ-00210 Wireless Charger
NEO Zeta Quick ID: NQ-00210
Thank you for purchasing Rombica device. Please read this user manual before
the operation and save it for the future.
GENERAL INFORMATION
- Surface for wireless charging
- micro-USB input
- LED indication
SPECIFICATION
Input: micro-USB 5V/2k 9V/1.67A
Output: 5V/1A; 5v/1.5A (7.5W): 9V/1.1A (low)
Wireless charging distance: tip to 5 mm
In the box: micro-USB cable, user manual
Fast charge. Support 7.5W and 10W*
Work with Qi-compatible devices
This wireless charging pad produced according to the Qi standard. Please use
it with Qi-friendly phones. If your phone is not Qi-compatible, you should use
Qi-receiver (not included)
- use Quick Charge 2.0/3.0 wall charger (not included) for the fast mode (7.5W or IOW)
OPERATION OF THE DEVICE
- Place the wireless charger on a flat surface.
- Use (supplied) USB cable and connect the wireless charger to a wall charger (not supplied). breathing LED indication will turn on.
- Put your device (for example, smartphone with Qi receiver) on the center of the surface for wireless charging Qi-receiver in your device should be precisely on the center of wireless charger The LED indication will change to constant lights.
- Once your device is charged entirely, pull off it from the wireless charger.
- Disconnect the wireless charger from wall charger Use Quick Charge 2.0/3.0 wall charger (not included) for the fast mode (7.5W or 1 OW).
- if LED mode does not, please check that your device support Qi. Also be sure there are no foreign objects between your device and the vviretess charger and recheck its position.
SAFETY INFORMATION
- Before use be sure that voltage of wall charger is 5V or 9V (for the fast mode)
- In case of breaking do not try to open and repair device by yourself. Use service center.
- Avoid influence of the high humidity, dust and dirt. Use dry soft lint-free cloth to clean device. Not allowed to use washing or cleaning liquids.
- Do not store, use device near heat sources and flammable objects, during low or high ambient temperature. Charing can be done only under adult supervision. Recommended temperature is 5 to 35 °C.
- Never pull the cord to disconnect the cable, pull the plug.
- Not allowed to drop or hit device.
- Disconnect the wireless charger from the wall charger after use.
- Do not insert foreign objects into the device interfaces.
- Do not cover working device with cloth or other material.
- Do not try to charge your device by the wireless charger, if your device doesn’t support Di protocol.
- Magnetic fields from the wireless charger can damage bank cards. To avoid damage do not keep your bank card near working wireless charger.
- If you are using extemal Qi-receiver (adapter allowed to charge an non-Qi device to be charged by wireless charger), please connect it to your device at first. Do not place Qi-receiver on the working wireless charger separately from your device.
- Take a break from using if the wireless charge overheats.
- The wireless charge can affect wireless networks with low-level signal.
- Do not place on the working wireless charger device with connected USB cable. Disconnect all cables from your device before charging it by the wireless charger.
- If your device covered by thick case. wireless charge might do not work.
STORAGE CONDITIONS
** Keep the device in a dry, well-ventilated place, far from heaters and
direct sunlight. Keep the device out of reach of children. Do not bite or lick
device, as it may cause damage or explode the device. Children or persons with
disabilities should not use the device without the supervision of the
responsible person
TECHNICAL CHARACTERISTICS AND APPEARANCE MAY BE CHANGED WITHOUT PRIOR
NOTICE**
Do not dispose with household waste! Required to dispose this electrical
device at designated recycling collection point for electrical devices. It
ensures that device Is recycled professionally and prevents the release of the
harmful substance Into the environment. Make sure that device Is uncharged
before disposal