rombica ID:DL-H001 LED Desk Lamp User Manual
- June 9, 2024
- rombica
Table of Contents
rombica ID:DL-H001 LED Desk Lamp
GENERAL INFORMATION
SPECIFICATION
- Power supply: 100- 240 V, 50 – 60 Hz / 13 V, 1.2 A
- Max LED Power: 4.5W
- Light flow: 250 Lm
- Color temperature: 3000-4000 5000K
- LEDS use time: up to 30 000 hours
- Wireless charging Output: 5W
- Wireless charging distance: up to 5 mm
In the box
LED lamp, power adapter, manual Model LED L1 LED L2 150150410 mm Lamp size Lamp weight Cable length 150 150*443 mm 580t10 g 675 t10 g .5 m 1.5 m Work with Qi-compatible devices This wireless charging device produced according to the Qi standard. Please use it with Qi-friendly phones. If your phone is not i-compatible, you should use d-receiver not included).
POWER
Before start using device, connect power adapter included) to the device by
one side 5 and the wall socket by another side. Be sure that cable is well
connected.
HOW TO USE LED
Lamp is operating by touch buttons. Touch Power Button to switch on, touch Power Button again to switch off. Touch Mode Button to change color temperature.
DIMMING FUNCTION
You can adjust the brightness level of LED lamp- long press Power Button for
it. Brightness Will go from maximum to minimum level. stop pressing Power
Button to fix the brightness level.
TIMER FUNCTION
Long press Timer Button to set timer. LED will flash twice, which will confirm
setting timer. In this mode device will automatically power off after 40
minutes.
WIRELESS CHARGING FUNCTION
Device equipped with wireless charger. To start charging wirelessly, plug LED
lamp into power socket and then place your Qi-compatible device for example,
smartphone with Qi receiver) at the center of the wireless charging surface
l4). Qi-receiver in your device should be precisely at the center of wireless
charger.
STORAGE CONDITIONS
Keep the device in a dry, well-ventilated place, far from heaters and direct
sunlight. Keep the device out of reach of children. Do not bite or lick
device, as it may cause damage the device. Children or persons with
disabilities should not use the device without the supervision of the
responsible person.
TECHNICAL CHARACTERISTICS AND APPEARANCE MAY BE CHANGED WITHOUT PRIOR
NOTICE
Do not dispose with household waste! Required to dispose this electrical
device at designated recycling collection point for electrical devices. It
ensures that device is recycled professionally and prevents the release of the
harmful substance into the environment. Make sure that device is uncharged
before disposal.
SAFETY INFORMATION
- It’s highly recommended to use supplied power adapter. Be sure that the wall socket is TU0-24UV before connecting the power cord.
- In case of breaking do not try to open and repair device by yourself. Use service center.
- Avoid the influence of high humidity, dust, and dirt. Use the dry soft lint-free cloth to clean device. Not allowed to use washing or cleaning liquids.
- Permissible relative humidity for the safe use of the device no more than 85%.
- Do not store or use device near heat sources and flammable objects, during low or high ambient temperature. Recommended temperature is 5 to 35 °C.
- Not allowed to drop or hit device.
- Do not insert foreign objects to the device interfaces.
- Turn off the device after use.
- Never pull the cord to disconnect the cable, pull the plug.
- Do not cover working device by cloth or other material.
- While the LED light on, do not shine on eyes in short distance to prevent eye injury.
- Do not try to charge your device by the wireless charger, if your device doesn’t Support Qi protocol.
- Magnetic fields from the wireless charger can damage bank cards. To avoid damage do not keep your bank card near working wireless charger .
- If you are using external Qi-receiver adapter allowed to charge a non-Qi device to be charged by wireless charger, please connect it to your device at first. Do not place Qi-receiver on the working Wireless charger separately from your device .
- Take a break from using if the Wireless charge overheats.
- The wireless charging can affect wireless networks with low-level signal.
- Do not place device with connected USB cable on the working wireless charger. .Disconnect all cables from your device before charging it by the wireless charger 18. If your device covered by thick case, wireless charging might do not work.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>