ID:DL-A003 Portable Lamp Rombica LED Kitty User Manual

Portable silicone LED lamp
LED Kitty ID. DL-A0O3
LED Tommy ID DL-A004
LED Bunny ID DL-A006
LED RIcky ID DL-A007
LED Teddy ID DL-A008
USER MANUAL

ID:DL-A003 Portable Lamp Rombica LED Kitty

Thank you for purchasing Rombka device. Please read tt user manual before use and save it Ice Mtn reference The customer is respcnsible kr arry injuy or property damage caused by nal-compliance with safety instruction

DESIGNS

GENERAL INFORMATION

SPECIFICATION

Model| Kitty| Tommy/Teddy| Bunny|

Ricky

---|---|---|---|---
Input| 5V/0.5A| 5V/0.5A| 5V/0.5A| 5V/0.54
Body material| Silicone| Silicone| Silicone| Silicone
Built-in battery type| Li-Ion| Li-Ion| Li-Ion| Li-pol
Battery capacity| 1200 mAh/4.44 Wh| 1200 mAh/4.44 Wh| 1200 mAh/4.44 Wh| 500 mAh/1.85 Wh
MAX power|

0.65W (White) 0.84W (Color)

| 0.84W (White) 0.84W (Color)| 0.84W (White) 0.84W (Color)| 0.15W (White) 0.15W (Color)
Working time’| Up to 24 h (White) Up to 12 h (Color)| Up to 24 h (White) Up to 12 h (Color)| Up to 24 h (White) Up to 12 h (Color)| Up to 5 h (White) Up to 7 h (Color)
LED’s lifetime| 30 000 h| 30 000 h| 30 000 h| ? 30 000 h
Size| 117x111x112 mm| Tommy 122x122x154mn
Teddy 111x111x160mn| 115x102x158 mm| 147x102x151 mm

‘ Brightness may decrease during operation as the battery discharges. Maximum brightness achieved when the battery fully charged

HOW TO CHARGE

1. Turn off LED Lamp and insert provided micro-USB cable into respective port of the LED Lamp.
2. Plug USB port of the cable into USB port of your PC or wall charger (not provided).
3. Kitty – LED indicator blinks red while charging. When LED indicator turns green – charging is complete Tommy, Bunny, Teddy – LED indicator turns red while charging When LED indicator turns green – charging is complete Ricky – during the charging, the device will be red. When the device turns off red – charging is complete

HOW TO USE

Power ON/OFF
Kitty, Tommy, Teddy, Bunny – press the Power button. Ricky – press and hold the Power button. Ricky has 4 levels of brightness. To choose a level push the Power button shortly
How to switch operating modes
Mode #1 activates when the power is turned on. To change operating mode slap the device body

Operating modes

Kitty

1. Continuous white light
2. Continuous white light (MAX brightness)
3. Gradient color change
4. Sequential color change: red – yellow – purple -green – light blue – orange – blue – pink
5. Continuous color light (active color when mode was changed from #4 to #5)
6. Turning off LED lights

Tommy/Teddy/Bunny

1. Continuous white light
2. Continuous white light (MAX brightness)
3. Gradient color change
4. Continuous color light: red – green – blue -purple – yellow – light blue – pink
5. Sequential color change: red – green – blue -purple – yellow – light blue – pink
6. Turning off LED lights

Ricky

1. Continuous red light
2. Continuous green light
3. Continuous blue light
4. Continuous yellow light
5. Continuous purple light
6. Continuous light blue light
7. Continuous white light

SAFETY INFORMATION

1. Charge device’s baterry for 12 hours before first use. To achieve maximum battery capacity it Is necessary to charge-discarge it for 2 – 3 times.
2. Before charging ensure that supplied voltage is equal to 5V. Recommended wall charger parameters are 5V/500mA.
3. If device is not used for a long time, charge it at least once per month.
4. Standard cycle life of the battery is 500 charge-discharge cycles. After exceeding this number battery capacity may decrease.
5. Before charging the device be sure that you use USB — micro-USB cable. Using an incompatible cable can damage the device.
6. When detaching USB cable from device hold the USB connector. Do not pull wire.
7. Do not store, use or charge device near heat sources and flammable objects, in low or high ambient temperature. Charing can be done only under adult supervision. Recommended temperature is 5 to 35 °C.
8. Do not expose the device to strong impacts or mechanical shock. Do not attempt to disassemble, repair or modify device by yourself. Any device modification results in termination of the warranty. Contact service center if device needs repairs.
9. The device should be protected from high humidity, rain, dust and dirt. Do not allow water to enter the device, do not put the device in water.
10. Prevent exposure of the device to direct sunlight.
11. Keep the device out of the reach of children. Do not bite or lick the device, as this may damage or explode it. This device should not be used by young children or persons with disabilities without supervision of the responsible person providing safe use. Prevent young children from playing with a device.
12. Do not insert foreign objects into device ports.
13. Use dry soft lint-free cloth to clean device. It is not allowed to use cleaning liquids.
14. The device is not intended for the commercial use.
15. Do not cover working device with cloth or other material.

STORAGE CONDITIONS
Keep the device in a dry, well-ventilated place, far from heaters and direct sunlight. Keep the device out of reach of children.
IN THE BOX

1. Portable Silicone LED Lamp
2. micro-USB cable
3. User manual

TECHNICAL CHARACTERISTICS AND APPEARANCE MAY BE CHANGED WITHOUT PRIOR NOTICE
Do not dispose with household waste! Required to dispose this electrical device at designated recycling collection point for electrical devices. It ensures that device is recycled professionally and prevents the release of the harmful substance into the environment. Make sure that device is uncharged before disposal

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>