SoClean Adapter for Somnetics Transcend and HDM Z1 Instruction Manual

June 9, 2024
SoClean

SoClean logo Adapter for Somnetics Transcend and HDM Z1
Instruction Manual

Connecting the Adapter

to the Somnetics Transcend and HDM Z1

  1. Remove the PAP hose from your Somnetics Transcend or HDM Z1.

  2. Detach the Injection Hose A from the Injection Fitting and Injection Hose B. Save the Injection Fitting and Injection Hose B in case you need them in the future.SoClean Adapter for Somnetics Transcend and HDM Z1 - Figure 2

  3. Install the SoClean Adapter onto the PAP hose.SoClean Adapter for Somnetics Transcend and HDM Z1 - Figure 3

  4. Connect Injection Hose A to the SoClean Adapter.
    Your are now ready to use your SoClean.
    SoClean Adapter for Somnetics Transcend and HDM Z1 - Figure
4Place mask into the SoClean Chamber or SoClean 2 Go Sanitizing Bag and run the disinfecting cycle.

WARNING: Injection Hose A must be attached to the SoClean Adapter and the back of the SoClean device at all times when operating your SoClean.

Disconnecting the Adapter

from the Somnetics Transcend and HDM Z1

  1. Once the disinfecting cycle is complete, please remove the SoClean Adapter from your PAP hose.
    SoClean Adapter for Somnetics Transcend and HDM Z1 - Figure
5

  2. Reconnect your PAP hose to your Somnetics Transcend or HDM Z1.
    You are now ready to use your PAP device.
    SoClean Adapter for Somnetics Transcend and HDM Z1 - Figure
6

If you need help connecting
your adapter, contact SoClean®.
EU 00800 5558 8811 US 866-501-3705 CA 800-916-4577
soclean.com | info@soclean.com
12 Vose Farm Road | Peterborough, New Hampshire 03458 USA

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals