SoClean Adapter for ResMed Airsense 10 Instructions

SoClean Adapter for ResMed Airsense 10

CONNECTING TO

1. Detach the Injection Fitting from the Injection Hose A. Save Injection Fitting in case you need it in the future.
2. Remove the original lid from the reservoir base by opening the lid fully, pushing one side of the hinge tab outward and freeing the lid from the base.
3. Lift the gasket from the original lid and transfer it to the new SoClean lid.
4. Install the new lid with the black adapter tube to the reservoir base by inserting the left pin into the left notch. Pull the lid toward you and insert the right pin into the right notch
5. If needed, refill your reservoir. Close the new lid and insert the reservoir into your PAP unit like you normally would.
6. Connect the Injection Hose A by pushing it onto the end of the port of the adapter lid. You are now ready to use the SoClean.

Adding water to your humidifier reservoir: When you need to add water to your reservoir please remove the Injection Hose A from the adapter lid and remove the reservoir from the PAP machine. Add
water and reinsert into the PAP machine and then reconnect the Injection Hose A

WARNING: Injection Hose A must be attached to the SoClean adapter at all times when operating your PAP or the SoClean.

DISCONNECTING THE

IMPORTANT: If you need to disconnect the SoClean from your adapter, please reinstall the original humidifier lid onto your PAP machine. If you fail to do this, the water in your humidifier will be pushed out through the hose and flooding will result. SoClean is not responsible for damage resulting from equipment mishandling.

1. Disconnect the Injection Hose A from the port of the adapter lid.
2. Remove the reservoir from the PAP machine.
3. Detach the adapter lid from the reservoir base by opening the lid fully, pushing one side of the hinge tab outward and freeing the lid from the base.
4. Lift the gasket from the adapter lid and transfer it to the original lid.
5.  Connect the original lid to the reservoir base by inserting the left pin into the left notch. Pull lid toward you and insert the right pin into the right notch.
6. Close the lid and install the reservoir back into your AirSense 10.

References

• SoClean | Bettering Lives Through the Power of A Better Clean

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>