MOUSETRO ZN-S03 Smart Deadbolt User Manual

MOUSETRO ZN-S03 Smart Deadbolt

Product layout

Packing List

Front Panel

|

Back Panel

|

Buckle Box

|

Strike Plate

|

M6x5p screw 2

---|---|---|---|---

Lock Body

|

Lock Body Mounting Screw• 4

|

Mounting Stud* 1

M4x40 screw 1

|

Key*2

|

IC Card* 2

|

Hole Drawing

|

Manual* 1

Panel and lock body installation

1. Use the hole adaptor to make door holes according to the size instruction.

2. Adjust center distance of lock body to 60mm or 70mm (factory setting is 60mm). Insert the lock body into the hole of door and tighten it with screws.

3. Install the mounting stud to the front panel corresponding to the screw hole (as the picture shows). Put the main cable down through the lock body, make the panel close to the do or surface.

4. Fix back plata and back panel onto the door, and tighten it with screw M6x50.

5. lnsert the data cable to the socket which is on the back panel.

6. According to your actual door open direction to adjust the switch direction.
   “R” means right open and “L” means left open.

7. Fix the back panel onto the back plate.
   and tighten it with screws M4x40 and M4><124(which is screwed to the panel by factory)
   

8. Check whether the knob works properly, if not, back to step 6.
   

9. Install batteries and Iha battery covary. Check all electronic functions and verify  the mechanical keytop unlock. If all functions are normal, you can register an account and usa your smart lock.
   

Product Features

Product Features (According to actual model):

Open Way: Fingerprint, password, IC card, mechanic key, Bluetooth, and etc. Bring new experience to open the door.
Fingerprint: Advanced sami-conductor sensor, 360 degrees identification angla. Effective fingerprint recognition (FRR<3%, FAR<0.01 %)_
Password: Advanced touch technology, which allows to put 1-12 digit numbers before and after true password.
Capacity: Fin9erprint 1 00pcs, password 1 00pcs, card 1 00pcs (Total 250pcs mixed freely)
Membership management: The administrator has the hi9hest rights to edit and set {users can only lock and unlock the door).
Alarm function: Low power alarm. password protection alarm External power supply: Please use power source or other equipment which is 5V to recharge for emergency when low power(Replace new battery once door is open).

Remark

1. Please reset factory default and clear all member records immediately after the lock is installed
2. Please use different and more an9le when input fingerprint, Do attention lo do with no hard.
3. We suggest to change battery at least in 6 months period, in order to avoid smart lock damage because of exhausted battery. The lock uses 4•AA alkaline batteries. When first lime alarms “low battery, please replace battery”, it can be open around 50 limes. But please replace batteries lmmedlataly In order to avoid any lnconvanlanca.
4. By continuous 5 times wrong input with fingerprint/password/card, the lock will be alarmed and locked for 90 seconds.

Guide

1. Reset factory setting: Unlock with any fingerprint, password or IC ca rd befo ra Bl uatooth connactad.

2. Unlock/lock: Use mobile, fingerprint, password or IC card lo open when outdoor. Use unlock/ lock button to open when indoor.

3. Bell function:press” “when screen is on.

4. Reset factory mode( two ways)

5. Press” factory reset” button

6. Remove the device from APP, lock wiI be reset factory automatics.
   

Bluetooth connecting( two ways

Click on the upper right corner in APP Manual addition method:

1. Click “Camera/lock” category on the left
2. Search “Door Lock (Bluetooth)”
3. Start Bluetooth network connection.
4. In 3rd page, waiting for device connecting.

Automatic search method:

1. Select device search page

2. Search the lock automatically in the page of APP

3. Click on the link, and waiting for device connection
   

4. Bluetooth: In App page, slide right to unlock.slide left to lock

5. Fingerprint: Click membership? administration in APP, scan fingerprint according to tips, then you may use scanned fingerprint to open.

6. Password: Click membership administration in APP, input password, then you may use input password lo open.

7. card: Click membership administration in APP, scan IC card, then you may use IC card to open.

8. Automatic lock: on App page, slide down to setting with auto-lock on/off.
   The door will be automatically closed in 6 seconds when auto-lock function ison.

9. Open direction: In App page, slide down to revise door open direction.

10. Voluma: In APP page, slide down to sat volume with muta, low, normal and high.

Please scan the QR code with your cell phone camera to watch the installation video.
Following the video guide to install may avoid most installation troubles.

App download

APP interface

App page

App registration : please register new account or use sms password to enter APP. If you do not have an account, Click “new account” to register, following slaps, to get sms, and new password setting. Or go ahead to enter APP directly with elCist account Login way includes password, verifying password by sms, social account.

Technical

release:+/-ski

Customer Support

Email :support@mousetro.net

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>