SoClean PNA1604-23-CA Universal Hose and Mask Maintenance Adapter Kit Instruction Manual
- June 9, 2024
- SoClean
Table of Contents
So Clean PNA1604-23-CA Universal Hose and Mask Maintenance Adapter Kit
Instruction Manual
HOSE AND MASK MAINTENANCE
COMPATIBLE WITH MOST CPAP HOSES
-
So Clean Adapter
-
Hose Sleeves [For use with 12 mm hose]
If you need help connecting your adapter, contact So Clean.
For So Clean operation information, please see the User Manual provided with the device. An electronic version of the User Manual is available at SoClean.com or you may contact Customer Care.
IMPORTANT: This adapter needs to fit snugly. If the fit appears too tight, do not force adapter into tubing. If the adapter is loose, call Customer Care.
US: 1-866-501-3705 | CA:
1-800-916-4577
SoClean.com |
info@soclean.com
Installation Instructions
So Clean Adapter
Shown connected to popular CPAP hoses.
If you are a So Clean 3 user, move on to Step 1.
If you are a So Clean 2 user:
Detach Ozone Tube from Injection Fitting or your previous So Clean Adapter. Save Injection Fitting in case you need it in the future.
Move on to Step 1
-
Remove the hose from your sleep equipment.
-
Install the Adapter onto the So Clean hose.
-
Connect Ozone Tube to the So Clean Adapter. Your are now ready to use your So Clean.
Place mask into the So Clean Chamber and run the maintenance cycle.
NOTE: So Clean is not responsible for damage to your sleep equipment machine or personal property resulting from equipment mishandling.
WARNING: The Ozone Tube should always be connected to the So Clean Adapter and the back of the So Clean unit when operating the So Clean.
Sleep Equipment Hose Compatibility
For use with hose diameters of 15 mm and 19 mm and length up to 6’ 6”.
A 12 mm hose diameter will require a So Clean Hose Sleeve.
The images shown are actual size and can be used to determine which hose you have.
If you determine you require the Hose Sleeve, contact So Clean Customer Care
or your authorized reseller.
Reconnecting Your Sleep Equipment
Once the Maintenance Cycle is complete and you are ready to use your sleep equipment:
-
Remove the So Clean Adapter from your hose
-
Reconnect your hose to the sleep equipment hose port.
Using Your SoClean
The below images show both So Clean devices connected.
Once you have completed the setup steps, you are ready to begin the daily maintenance of your sleep equipment accessories with your SoClean.
Safety Checklist Before Using Your So Clean
- Sleep equipment accessories are washed in sink and dried before first use
- So Clean Adapter is installed on sleep equipment hose
- Ozone tube is connected to the So Clean Adapter
- Sleep equipment hose is still connected to the mask
- SoClean is powered on
- Filter is installed
SoClean Inc. 12 Vose Farm Road | Peterborough, NH 03458
US: 1-866-501-3705
CA: 1-800-916-4577
SoClean.com/patents
Issue Date: 06/2022
A001689-11_Rev A C001690 Rev A
Documents / Resources
|
SoClean PNA1604-23-CA Universal Hose and Mask Maintenance Adapter
Kit
[pdf] Instruction Manual
PNA1604-23-CA Universal Hose and Mask Maintenance Adapter Kit, PNA1604-23-CA,
Universal Hose and Mask Maintenance Adapter Kit, Hose and Mask Maintenance
Adapter Kit, Mask Maintenance Adapter Kit, Maintenance Adapter Kit, Adapter
Kit
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>