DEWALT DXFRSCH6-300 6 Port Charger Instruction Manual

DEWALT DXFRSCH6-300 6 Port Charger

Before using the 6 Port Charger, please read all safety and operating instructions. Save all instructions in a safe place for future reference.

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage.

• DANGER: Indicates an imminently hazardous situation which,if not avoided, w/11 result in death or serious Injury.

• WARNING: Indicates a potentially hazardous situation which,if not avoided, could result in death or serious injury.

• CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

• Used without word) Indicates a safety related message.
  NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.

• WARNING: Read all safety warnings and all instructions.
  Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

• WARNING: Never modify the product or any part of it. Damage or personal injury could result

• WARNING: To reduce the risk of injury, read the user guide.
  If you have any questions or comments about this or any product call DEWALT toll-free at 855-224-5127.

Introduction

Making Life Easier and Safer

DXFRSCH&-300 is designed for charging DXFRS300 Radios & allows you to charge up to six DXFRS300 simultaneously.
DXFRSCH&-800 is designed for charging DXFRSBOO Radios & allows you to charge up to six DXFRSB00 simultaneously.
The multi-charger provides a convenient and efficient way to charge multiple radios, and its compact size helps to preserve space.

Product Features

Important Safety Instructions

WARNING: Toreducerislcofinjury:
Before any use, be sure everyone using this unit reads and understands all safety instructions and other information contained in this manual. Save these instructions and review frequently.

1. To reduce the risk of electric shock, fire or injury, do not operate the charging dock or AC Adapter tt they are broken or damaged.
2. Do not disassemble the charging dock. Disassembly al the charging dock or AC Adapter may result in risk al electric shock or fire, and will void WARRANTY.
3. To reduce risk al damage to the power supply plugs and cords, pull the plug rather than the cord when disconnecting the charger from the AC outlet or from the charger.
4. To reduce the risk of electric shock, unplug the charger power supply from AC outlet before performing any maintenance or cleaning
5. Do not use cleaners or solvents to clean the exterior of the charging dock or AC Adapter. Use only a damp or dry cloth.
6. Do not expose this product to splashing or dripping water, snow or to direct sunlight.
7. Do not plug the wall adapter into the power outlet if the outlet is wet.
8. An extension cord should not be used unless absolutely necessary. Use al an improper extension cord could result in risk of fire and electric shock. Han extension cord must be used, please refer the table for the recommended extension cord.
   • An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller the gauge number al the wire, the greater the capacity of the cable.
   • An undersized cord will cause a drop in line voltage resulting in loss al power and overheating. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size.
   • The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The lower the gauge number, the heavier the cord.

Minimum Gauge for Cord Sets

American Wire Gauge

Mora Than| Not Mora Than
0| 6| 18| 16| 16      I     14
6| 10| 18| 16| 14      I     12
10| 12| 16| 16| 14      I     12
12| 16| 14| 12| Not Recommended

9. To reduce risk of injury, charge only compatible radios rechargeable batteries.
   Other batteries may explode, causing personal injury and damage.

10. To reduce risk of electric shock, do not allow any liquid to get inside the charger.

11. Bum hazard. To reduce the risk of injury, charge only DEWALT rechargeable battery packs. Other types of batteries may overheat and burst resulting in personal injury and property-damage

CAUTION

1. The DXFRSCH6-300 is to be used only with radio DXFRS300.
   The DXFRSCH6-800 is to be used only with radio DXFRSBOO.
   Do not use these to charge other radios or batteries.

2. The charger is not recommended for outdoor use. Use it only in dry location and batteries charge best at room temperature.

3. Unless It is necessary to use an extension cord, the AC outlet to which the power supply is connected should be close and easily accessible for the charger.

4. This charger and AC Adapter should not be used in wet locations or be subjected to stress. Arrange cord away from traffic areas and where it will not be a tripping hazard.

5. Do not use the charging dock in areas such as gas/refueling stations, blasting areas or other potentially explosive atmospheres.

6. Connect the power cord only to an appropriated fused and wired AC outlet with correct voltage which is specified on the product.

7. If the charger or radio: overheats; has a damaged cord or plug; has been dropped or damaged; or has been dropped into water, disconnect any charger from its power supply, and discontinue use of the product.

8. DEWALT recommends your radio is turned off while being charged.

9. To prevent serious damage to the battery, maximum ambient temperature around the charger must not exceed 113 “F (45 “C). Longest life and best performance can be obtained if the battery is charged when the air temperature is between 65 “F and 75 “F (18 -24 “C). DO NOT charge the battery in an air temperature below +50 “F (+ 1 O “C), or above + 113 “F (+45 “C).

10. The charger relies on slots in the top and bottom of the housing for ventilation. Do not place any object on top of the charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat source.

11. If the radio is not going to be used for a long time period, remove it from the charger.

12. Battery should not be stored completely depleted of charge. To keep the battery in the best condition, it will need to be recharged every 3 months. Also, after being stored, the battery will need to be recharged before use.
    NOTICE: The charger contacts can be shorted by foreign materials such as grinding dust, metal chips, steel wool, aluminum foil, etc. These items should be kept away from the charger cavities. Ensure each radio is free from such material before inserting it into the charger. Always unplug the charger when it is not in use and prior to cleaning it

Operation

Charging Procedure

For charging radios with holster In 6 port charger:

1. Insert the AC Adapter into the DC Power Inlet of the charging dock. (Fig. B)
2. Plug the AC Adapter into the matching power outlet.
3. Insert the radio with battery into the charging port as shown. The charger can charge up to six radios at one time – each can be placed into any available port (Fig. C).
4. It is recommended that the radios be turned off while being charged.
5. Charging status of a radio is indicated by the corresponding LED indicator and charging time for each radio may be different.
6. If the radios do not charge, please refer to TROUBLESHOOTING GUIDE.
   LED indicator| Status
   ---|---
   Charging| On (Red)
   Fully Charged| OFF

NOTICE: To protect the lithium battery, the charging circuit allows the battery to be charged in environments ranging from 50’F (10″C) to 113″F (45″C).

NOTICE: Avoid pulling the radio antenna when remove the radio from charger.

For charging radios without holster In 6 port charger

1. Insert the provided Port Adapter into charger compartment. (Fig. D)
2. Insert the AC Adapter into the DC Power Inlet of the charging dock. (Fig. B)
3. Plug the AC Adapter into the matching power outlet.
4. Insert the radio with battery into the charging port as shown. The charger can charge up to six radios at one time – each can be placed into any available port (Fig. D).
5. It is recommended that the radios be turned off while being charged.
6. Charging status of a radio is indicated by the corresponding LED indicator and charging time for each radio may be different.
7. If the radios do not charge, please refer to TROUBLESHOOTING GUIDE.
   LED indicator| Status
   ---|---
   Charging| On (Red)
   Fully Charged| OFF

NOTICE: To protect the lithium battery, the charging circuit allows the battery to be charged in environments ranging from °50’f (10’C) to 113’f (45 C).

NOTICE: Avoid pulling the radio antenna when remove the radio from charger.

NOTICE: Radios with holsters and radios without holsters (need to insert Port Adapter into charger compartment) can be charged at the same time. (Fig. E)

Specifications

• AC Adapter Input: 100-240V ~ 50/60 Hz 0.6A Adapter with 6 feet (1.8m) cable
• Operating Temperature: 32~ 113°F (0~45°C)
• (Radios Internal Charging Circuit: 50~ 113’F (10~45°C))
• Suggested Charging Temperature: Room temperature

Troubleshooting

P ro bl e m| P o ssib le caus e & h ow t o fix
---|---
Thecharging RED light stays on for a few seconds only.| Check position of radio. Radio should be upright in the charging port. The charge indicator light w II stay on as long as the radio is charging, and the light w II go off when the charging is complete.

Make sure the charging environment is within the operating temperature range. 50~113’F(10-45’C)

Radio inserted but charging LED still is OFF.| Make sure the charging environment is within the operating temperature range. 50-113’F(10-45’C)

Check if the radiohas battery that is inserted correctly. Check the position of the batteries accorning topolarity.

Check for contact contamination or corrosion:

•   Remove the radio from the charger.

•   Verify that the battery is DEWALT supplied battery. Other batteries may not charge.

•   Inspect the charging contacts on radio for

contam i nation or corrosion.

Clean the charging contacts using a dry cloth.

•   Inspect the charging contacts in the charger pocket for contamination or corrosion. If co ntaminati o n o r corros i o n are found, remove p owe r from the charger and clean the charging contacts using a dry cloth.

Try replacing the battery. If the fault nolonger exists ,

then take the faulted battery out of service.

If the fault persists with the replacement battery,

contac t o ur c ust o mer service.

Customer Assistance

Product Service & Support

• For any questions about operating this new DEWALT branded product, PLEASE CONTACT US FIRST … do not return this product to the retail store. The contact information for support will vary depending on the country in which you purchased and utilize the product.
• To obtain warranty service or other information for products purchased from Shine Flex itself or through its authorized reseller or agent and utilized in the U.S.A., please email us at cs@shineflexglobal.com. You will receive instructions on how to ship the products at your expense to an our Authorized Service Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; and, most importantly; (c) your address and telephone number.
• For further information needed on its features, please visit www.shineflexglobal.com
• for frequently asked questions and the electronic manual.
  ©2022 Shine Flex US LLC, Illinois, USA.

Warranty & Trademark Acknowledgment

Limited 1 Year Warranty

• Shine Flex warrants to the original consumer purchaser only that this product and the component parts thereof, will be free from defects in workmanship and materials. During this period, Shine Flex will, repair or replace, at its sole option and discretion, this product or any defective parts. Shine Flex’s liability hereunder shall be limited to repair or replacement of the defective part or parts, and such correction shall constitute a fulfillment of all of Shine Flex’s warranties hereunder.

• This limited 1-year warranty does not apply to accessories and consumables and is only valid for the original consumer purchaser in limited jurisdictions and is not transferrable. This limited 1-year warranty will automatically terminate prior to expiration tt this product is sold or otherwise transferred to another party. The product must be purchased from Shine Flex or an authorized dealer or the warranty is void. This 1 year limited warranty is valid only for products purchased and utilized in specific jurisdictions. Please visit our website at www.shineflexglobal.com for a list of jurisdictions wherein this limited 1 year warranty is valid.

• This limited 1 year warranty does not cover damage due to misuse, abuse, negligence, acts of God, accident, commercial use or modification of, or to any part of this product. This warranty does not cover damage due to improper operation, maintenance or installation; ordinary wear and tear; or attempted alterations or repairs by anyone other than Shine Flex or someone authorized by Shine Flex to do warranty work. Any unauthorized alterations or repairs will void this warranty. This limited 1 year warranty does not cover product sold AS IS or WITH All FAULTS. This limited 1-year warranty is invalid if the factory-applied serial number or date stamp has been altered, defaced or removed from this product. This limited 1-year warranty does not cover products purchased or utilized in a jurisdiction not covered.

• The procedure for obtaining service and support, and the applicability of this warranty, will vary depending on the country or jurisdiction in which you purchase and utilize the product. For details on obtaining product service, support and other warranty information please visit www.shlneflexglobal.com.

• This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and country to country.
  EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, SHINE FLEX MAKES NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SHINE FLEX EXPRESSLY DISCLAMS All WARRANTIES NOT STATED IN THIS LIMERED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMrTED TO THE TERMS OF THIS EXPRESSED WARRANTY.

• LIMrTATION OF REMEDIES AND DAMAGES. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. SHINE FLEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ATTORNEYS’ FEES AND/OR COSTS OF LITIGATION, FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. SH INE FLEX IS NOT LIABLE FOR ANY DAMAGES CAUSED BY THE PRODUCT OR BY THE PRODUCT TO PERFORM, INCLUDING ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGES, OR CONSEQUENTIAL DAMAGES. SHINE FLEX IS NOT LIABLE FDR ANY CLAIM MADE BY A THIRD PARTY OR MADE BY YOU FOR A THIRD PARTY. THIS LIMrTATION APPLIES WHETHER DAMAGES ARE SOUGHT, OR A CLAIM MADE, UNDER THIS WARRANTY OR AS A TORT CLAIM (INCLUDING NEGLIGENCE DR STRICT PRODUCT LIABILITY), A CONTRACT CLAIM, OR ANY OTHER CLAIM. THIS LIMITATION CAN NOT BE WAIVED OR AMENDED BY ANY PERSON. THIS LIMITATION OF LIABILrTY WILL BE EFFECTIVE EVEN IF SHINE FLEX OR AN AUTHORIZED REPRESENTATIVE OF SHINE FLEX HAS BEEN ADVISED BY YOU OF THE POSSIBILrTY OF ANY SUCH DAMAGES.

• Some states and countries do not allow limitations on how long an implied warranty lasts and do not allow the exclusion or !imitation of incidental or consequential damages, so the above !imitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and country to country.

• Provided that the product was purchased from Shine Flex itself or through its authorized reseller or agent and utilized in the U.S.A., Shine Flex will, without charge, repair or replace, at its option, defective products, products or component parts upon delivery to the authorized Shine Flex Authorized Service Center, accompanied by proof of the date of first customer purchase, such as a duplicated copy of a sales receipt.

• You must pay any initial shipping charges required to ship the product for warranty service, but the return charges, to an address in the U.S.A, will be at Shine Flex’s expense, tt the product is under warranty.

For Products Purchased Outside the U.S.A.
Please contact your authorized local reseller or agent for warranty information.

Trademark Acknowledgment
DEWALre and the DEWALT Logo are trademarks of the DEWALT Industrial Tool Co., or an affiliate thereof and are used under license.
The yellow/black color scheme is a trademark for DEWALT power tools & accessories.
© 2022 DEWALT
U.S. & Canada Only
Product Manufactured by:
Shine Flex US LLC, Illinois, USA.
For product, service or warranty information contact us at
www.shineflexglobal.com (BSS) 224-5127

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>