MADDOX 58450 Deluxe Paintless Dent Repair Kit Owner’s Manual
- June 12, 2024
- MADDOX
Table of Contents
MADDOX 58450 Deluxe Paintless Dent Repair Kit
Product Information
The Superior Automotive Tools MBD1 Deluxe Paintless Dent Repair Kit is a handy tool that helps in repairing minor dents on vehicles without the need for costly bodywork. The kit includes a glue gun, pull tabs, release agent, slide hammer, and scraper. The glue gun is powered by 120VAC / 60Hz / 40W and comes with a set of instructions to help you use it safely and effectively. The pull tabs come in different sizes and shapes to help you fix dents of varying sizes. The release agent makes it easy to remove the glue and pull tabs once the dent has been fixed. The slide hammer helps to pull out the dent, and the scraper helps to remove any residue left behind by the release agent.
Product Usage Instructions
- Before using the Superior Automotive Tools MBD1 Deluxe Paint less Dent Repair Kit, read the manual carefully and understand all the safety instructions.
- Make sure that all parts of the kit are present and undamaged before using them. If any parts are missing or broken, contact the support team immediately.
- Choose the pull tab of the same size as the dent you want to repair.
- Clean the dent area with release agent using a clean cloth. Be careful not to touch the melted glue with your skin.
- Insert a glue stick into the glue gun and plug it into a grounded 120VAC outlet. Allow it to warm up for ten to fifteen minutes before use.
- Apply glue to the pull tab and quickly place it on the center of the dent. Hold it there for ten seconds.
- Wait for two to three minutes for the glue to set before applying the slide hammer over the end of the pull tab. Slide it backward and forward until the dent is raised.
- Remove the pull tab. If necessary, spray release agent around the pull tab to soften the glue and use the scraper to remove it.
- Clean the area thoroughly to remove any residue left behind by the release agent.
- Inspect the kit before every use and do not use it if any parts are loose or damaged.
- Maintain product labels and nameplates as they carry important safety information. Contact Harbor Freight Tools for a replacement if they are unreadable or missing.
- Keep the manual and receipt in a safe and dry place for future reference.
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
SUPERIOR AUTOMOTIVE TOOLS
Deluxe Paintless Dent Repair Kit
Visit our website at: http://www.harborfreight.com
Email our technical support at:
productsupport@harborfreight.com
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Copyright© 2023 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
WARNING
Read this material before using this product. Failure to do so can result
in serious injury. SAVE THIS MANUAL.
Specifications
- Glue Gun : 120VAC / 60Hz / 40W
Important Safety Information
WARNING
TO PREVENT SERIOUS INJURY:
-
TO PREVENT ELECTRIC SHOCK: Keep glue gun dry, do not use in rain.
-
Avoid skin contact with tip and melted hot glue.
-
Do not smoke, strike a match, or be near a spark when using or opening the Release Agent.
-
Work in a well ventilated area.
-
Wear ANSI-approved safety goggles and heavy-duty work gloves during use.
-
This product is not a toy.
Do not allow children to play with or near this tool. -
Use as intended only.
-
Inspect before every use; do not use if parts are loose or damaged.
-
Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this symbol to
avoid possible injury or death.
DANGER
Indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
NOTICE CAUTION
Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
For technical questions, please call 1-888-866-5797.
Instructions
Note: This Kit will not repair ALL dents, regardless of size. It will not work on aluminum surfaces.
-
Insert Glue Stick into Glue Gun. Plug Glue Gun into grounded 120VAC outlet. Allow to warm up for ten to fifteen minutes before use.
Note: Do not use crafting glue sticks. -
Using clean cloth (not included), clean dent area with Release Agent.
-
Choose Pull Tab the same size as dent.
-
Apply glue to Pull Tab then quickly place Pull Tab on center of dent and hold there for ten seconds.
-
Wait two to three minutes for glue to set before applying puller.
Slide Hammer
-
Place Slide Hammer over end of Pull Tab. Slide it backward and forward until dent is raised.
-
Remove Slide Hammer.
-
Remove Pull Tab. If necessary, spray Release Agent around Pull Tab to soften glue and use Scraper to remove glue.
-
Clean area thoroughly to remove Release Agent residue.
T-Puller
- Place T-Puller over end of Pull Tab. Pull it backward until dent is raised.
- Remove T-Puller.
- Place T-Puller over end of Pull Tab. Pull it backward until dent is raised.
- Remove T-Puller.
Lever Puller
Use on a small dent.
-
Place Lever Puller on the Pull Tab. Turn knob until both of the Puller’s feet are flat against the vehicle’s surface.
-
Slowly squeeze the Lever Puller’s handles until there is a pop and the dent is raised. Stop when dent returns to normal surface level. Turn knob, if necessary, to increase pull.
-
Remove Lever Puller.
-
Remove Pull Tab. If necessary, spray Release Agent around Pull Tab to soften glue and use Scraper to remove glue.
-
Clean area thoroughly to remove Release Agent residue.
Repairing High Spots
Use a hammer (sold separately) and Knockdown Tool or Shape Stick against
raised spot until desired smoothness is reached.
Knockdown Tool
- Hold the Knockdown Tool over raised area and lightly tap the hammer on the head of the tool to push the raised area down.
- Change tip by unscrewing it from the tool and screwing in the other one.
Shape Sticks
Hold the desired Shape Stick over raised area and lightly tap hammer on the
head of the tool to push the raised area down.
SUPERIOR AUTOMOTIVE TOOLS
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR
THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND
NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS
OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR
ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Parts List and Assembly Diagram
Parts List
| | | | | |
---|---|---|---|---|---|---
Part| Description|
Qty
| |
Part
| Description|
Qty
1| Lever Puller|
1
|
14
| Hot Glue Gun|
1
2| Scraper|
1
|
15
| Pointed Tip Shape Stick|
1
3| Rectangle Pull Tab, 1.20″ L x 0.80″ W|
2
|
16
| Round Tip Shape Stick|
1
17
| Slide Hammer|
1
4| Rectangle Pull Tab, 1.40″ L x 0.90″ W|
2
|
21
| Round Pull Tab, Ø 1.25″|
2
22
| Round Pull Tab, Ø 1.40″|
2
5| Rectangle Pull Tab, 1.92″ L x 1.28″ W|
2
|
23
| Round Pull Tab, Ø 1.60″|
2
24
| Oval Pull Tab, 1.34″ L x 0.90″ W|
2
6| Knockdown Tool (with Pointed Tip)|
1
|
25
| Oval Pull Tab, 1.60″ L x 1.08″ W|
2
7| T-Puller|
1
|
26
| Oval Pull Tab, 1.90″ L x 1.30″ W|
2
8
| Round Tip (for Knockdown Tool)|
1
|
27
| Round Pull Tab, Ø 0.60″|
2
9| Curved Scraper|
1
| 28| Round Pull Tab, Ø 0.80″|
2
10
| Flat Tip Shape Stick| 1| 29| Round Pull Tab, Ø 1″| 2
11| Dome Tip Shape Stick|
1
| 30| Release Agent|
1
12| Dimpled Tip Shape Stick|
1
|
31
| Case (not shown)|
1
13
| Glue Stick|
15
|
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase
instead.
Note: Some parts are listed and shown for illustration purposes only, and
are not available individually as replacement parts. Specify UPC 193175520906
when ordering parts.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet
high quality and durability standards, and warrants to the original purchaser
that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents,
repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no
event be liable for death, injuries to persons or property, or for incidental,
contingent, special or consequential damages arising from the use of our
product. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation of exclusion may not apply to
you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take
advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. Proof of purchase date and an explanation of
the complaint must accompany the merchandise. If our inspection verifies the
defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide
you with a replacement. We will return repaired products at our expense, but
if we determine there is no defect, or that the defect resulted from causes
not within the scope of our warranty, then you must bear the cost of returning
the product.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
SUPERIOR AUTOMOTIVE TOOLS
26677 Agoura Road
Calabasas, CA 91302
1-888-866-5797
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>