AXAGON PWC-PQ38 PD and QC Car Charger Instructions
- June 9, 2024
- AXAGON
Table of Contents
PWC-PQ38 PD and QC Car Charger
Instructions
PWC-PQ38 PD and QC Car Charger
INSTRUCTIONS FOR USE
(original) revision 1.0
PWC-PQ38
POWER DELIVERY 3.0 & QUICK CHARGE 3.0
Dual USB Output CAR CHARGER
SAFETY AND CORRECT HANDLING
– Ensure that the output parameters of the adapter match the parameters of the
powered deuce.
– Only use good quality and undamaged US8 cables.
– Do not cross-connect the charging adapter outputs. Adapter damage may occur!
– Protect the adapter from high temperatures and mechanical damage.
– Do not cover the adapter and allow access to air for sufficient cooling.
– The adapter may become hot during use it Is normal.
– If the adapter is damaged, disconnect It IMMEDIATELYand do not use it again!
– Do not disassemble, modify, or attempt to repair the adapter.
– If you do not use the adapter, unplug it
– Do not leave the adapter unattended. 
USEFULL TIP:
DO YOU WA\T FAST, ROBUST AND STABLE CHARGING CABLE?
FOR QUALITY AXAGON USB CABLES CHECK: www.axagon.eu
TECHNICAL SUPPORT:
More information, FAQs, manuals and drivers can be found on the product page
in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing
helped? Write to our technical support:
support@axagon.cz.
At the end of its service life, do not throw the product into household
waste; take it to a collection point for electrical equipment recycling. For
information about collection and recycling programmes in your country, contact
your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonisation
legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The
complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user instructions.
The manufacturer disclaims any liability for damage that may occur due to
improper use of the product or failure to follow the instructions contained
herein. Product use other than specified must be consulted with the
manufacturer.
Do not use the product in humid or explosive environments and near flammable
substances.
PRODUCT SUPPORT LINK http://axagon.euiprodukty/pwc-pq38#supportunkGoal
Car charger
0 2022 AXAGON
Wrobce / Manufacturer. RealQ s.r.o. – 2elezna 5, 619 00 Bmo, Czech Republic
All rights reserved.
All text and pictorial materials contained in this document are protected by
Copyright Act.
All marks Indicated here are the registered trademarks of their appropriate
owners.
Specifications are subject to change without prior notice. Made in CHINA for
Axagon.
www.axagon.eu