SUNSKY U6 Wrist Speaker Watch User Guide
- June 6, 2024
- sunsky
Table of Contents
SUNSKY U6 Wrist Speaker Watch
Function Features
- Superb acoustic design with outstanding sound quality.
- Bluetooth audio and hands-free calling.
- Bluetooth selfie function when paired with the phone.
- Colorful LED lights surround the speaker with 8 display patterns.
- Voice notification for settings and mode selections.
- Supports Micro SD card for playing WAV/MP3 music.
- High capacity Li-ion battery for long battery life.
Use
- Please charge for at least 2 hours before use. A red LED light at the bottom of the speaker will illuminate to indicate the speaker is charging.
- It will start in Bluetooth mode if there is no Micro SD card inserted.
Button Function Guid
(Play/Pause):
- Long press to turn on/off.
- Short press to play/pause.
- Short press to answer/hang-up calls when paired with a Bluetooth-enabled phone.
- Short press to bring speaker out of standby mode.
(Vol+):
1. Long press to increase volume.
2. Short press for next song/next station.
(Vol-):
1. Long press to decrease volume.
2. Short press for last song/last station.
(Switch Mode):
1. Long press to switch modes.
2. Short press to take a selfie (the speaker must be paired to a Bluetooth-
enabled phone and the phone’s camera app must be open).
(LED light control):
1. Long press to turn on/off LED lights.
2. Short press for changing light patterns. There are 8 different patterns.
Bluetooth Mode Guide
Bluetooth mode: Long press to turn on the speaker. A blue LED light will flash
and the speaker will start to search for nearby Bluetooth devices with voice
notifications (if a Micro SD card is inserted before you turn on the speaker,
it will identify the Micro SD card). Pair your Bluetooth device with the
speaker (Bluetooth name: U6). After successful pairing, short press Anti-lost
mode: In Bluetooth mode, the speaker will notify you if you become
disconnected from your paired Bluetooth device and will sound an alarm if the
Bluetooth device is beyond effective range. Press any button to cancel the
alarm. Otherwise, the alarm will last for 1 minute then stop automatically.
During this time, the speaker will attempt to reconnect to the paired
Bluetooth device if it is within range.
LED Lights Guide
to change the LED light display pattern. There are a total of 8 different patterns. to turn LED lights on/off.
Micro SD Card Mode Guide
Insert a Micro SD card with WAV/MP3 music into the slot and the speaker will
play music automatically. Long press to increase/decrease volume or short
press for next/last song.
FM Radio Mode Guide
Short press to toggle into FM mode. There will be a voice confirmation and
the blue LED light will flash. The speaker will search for FM stations
automatically and tune into the first searched station. Long
Technical Specification
- RMS:3W THD:10%
- Sensitivity:83dB
- SNR:88dB
- Power supply: DC5V/500mA
- Frequency:120HZ-20KHZ
- Bluetooth: Bluetooth V5.0+EDR
Helpful Tips
- Battery life will also depend on the volume of the music.
- Do not place the speaker at high temperatures.
- The speaker can resist gentle water spray and splash but cannot be partially or fully submerged.
- Speaker’s Bluetooth connection is highly dependent on compatibility with other Bluetooth devices. There may be issues if differences exist.
- Speaker can be charged with the DC 5V adapter or with a USB from a PC.
- If the speaker can not read from a Micro SD card or fails to be paired with a Bluetooth device, it may be a compatibility issue.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.