Saramonic Xmic Z3 USB Condenser Microphone User Manual
- June 4, 2024
- Saramonic
Table of Contents
Saramonic Xmic Z3 USB Condenser Microphone User Manual
Statement
Please read this manual carefully before use and operate and store in strict
accordance with the instructions provided. Please retain far future reference.
For any issues that cannot be resolved with the user manual, please refer to
your retailer for help or contact us at:
info@saramonic.com.
Cautions
- Do not use the unit under water, don‘t expose it to rain. Please store it in a cool, dry place.
- Please use and store it in normal temperature. Do not move it from overheated to super-cooled conditio n frequently as weII as keep away from heat sources such as heater, oven, or other devices that produce heat.
- When using and storing, please pay attentiDn tD dust and ma isture.
- Be careful to violent collision.
General Introduction
The Paramanic Xmic Z3 is a USB condenser microphone that delivers exceptional- quali sound to And roid devices, tablets and Mach Windows computers. Thanks to its cardioid polar pattern, the Xmic Z3 clearly captures speech in front of the mic while effectively reducing unwanted background noise. It features a gain control knob and mute function. The 3.5mm headphone jack allows you to monitor and ensure the audio intellig ibility during recDrdin g. With a detachab le desktop stand and a pop filter, yDu can get started easily and quickly for home-studio recording, podcasting, live-streaming, etc
Features
- Condenser microphone with USB-C connectivity
- Ideal far home-studio recording, podcasting, live-streaming and mDre
- Compatible with Android devices, tablets, Mac/Wtndows computers
- Cardioid padar pattern
- Plu g and play, easy to use
- 3.5mm headphone output for direct & playback monitoring
- Gain control and mute function
- Detachable & rugged microphone desktop stand
Product Structure
-
Status indicator
Mode: Indicator
Mute OFF: Solid blue light
Mute ON: Solid red light
-
Gain Control
Turn the knob to adjust mic gain. -
Mute key
Touch yo mute/unmute the microphone -
Locking knobs
-
3.5mm headphone jack
-
6 USB-C port
-
5/8″ threaded hole
-
Desktop stand
Accessories
-
Pop filter
-
USB to USB-C cable
-
USB-A to USB-C cable
-
3/8″ female thread adapter
Function
Angle Adjustment
- Loosen the knobs of both sides anticlockwise.
- Adjust the microphone at your desired angle. then tighten the knobs
Mounting the Xmic Z3 to a boom arm
Using the 5/8″ threaded hole
- Unscrew the locking knobs to remove the microphone from thedesktop stand.
- Mobnt the Xmic Z3 to a boom arm through its 5/8″ threaded hole.
Note: the boom arm is not included
Using the 3/8 ‘ female thread adapter
-
Unscrew to remove the stand base as shown.
-
Use the supplied 3/B“ female thread adapter to mount the Xmic Z3 to a boom army.
Note: the boom arm is not included.
Operation Guide
-
Connect the microphone to your smartphone/computer.
USB-C devices (Using the S\•i @IlBd USB-C to USB-C cable)
Mac/Windows Computer (Using the supplied USB-A to USB-C cable) -
. Connect headphones for audio monitoring.
-
Adjust the gain control knab according to yard r needs.
-
Attic h the pop filter to the microphone if needed.
-
You are ready to record.
Packing List
- X mic Z3 USB MicronNo n e • 1
- USB-A to USB-C Cable (2m) • 1
- 3/8″ Fennale Thread Adapter 1
- USB-C to USB -C Ca bye(2m) • 1
- Pop Filter x1
Specification
- Mic Capsule: 16mm condenser capsule
- Polar Pattern: Cardioid
- Frequency Response: 20Hz-20kHz
- Sensitivity: 36dB (OdB=1V/Pa, 1 kHz 1 Pa)
- Signal-to-Noise Ratio: 80dB
- Sampling Rate: 48kHz
- Bit Rate : 24bit
- Headphone Output Connector (Direct & Playback Monitoring): 3.5mm headphone jack
- Audio Output Connector: USB-C port
- Weight : 540g (19.05 oz.)
- Dimensions : 215.4×105.4x100mm
- Operating Temperature: 0°C to 50°C
- Storage Temperature: 10°C to 50°C
Polar Pattern
Frequency Response
